**The OARC PBX has been retired. This page remains for posterity** ====== Yealink Phones ====== Instructions on setting up compatible Yealink IP Phones ====== Yealink T4XG ====== The Yealink T4XG series is no longer in production but it still a functional and fairly up to date phone that can be picked up cheaply on EBay. They're highly flexible, configurable but lack support for modern codecs such as Opus. These settings may well apply to other Yealink devices. ===== Access the Web Interface ===== To find the IP address of your phone navigate to the following menu using the buttons on the phone: ''Menu Soft Key > Status'' Type the IP into your browser and you should be presented with the configuration web interface. The default credentials are admin / admin ===== Set a password ===== It's important to update the password from the default as soon as possible. In the web interface go to ''Security > Password'' and update it to something secure. {{:yealink-t42g-password.png?direct&800|}} ===== Configure Date / Time ===== Navigate to ''Settings > Time&Date'' in the web interface and set it up as shown below, adjusting your Timezone if required: {{:yealink-t42g-date-time.png?direct&800|}} ===== Configure your Account ===== Navigate to ''Account'' in the web interface and select an account that's not in use. Use the following screenshots as a guide to configuring the line, using your assigned Extension Number and Password: ==== With Encryption ==== {{:yealink-t42g-account-secure.png?direct&800|}} To enforce SRTP click on ''Advanced'' on the left and set it to Compulsory: {{:yealink-t42g-account-secure-2.png?direct&800|}} ==== Without Encryption ==== {{:yealink-t42g-account-insecure.png?direct&800|}} ===== Configure Codecs ===== Once you've setup your account, click on Codecs on the left to set codec priority. These phones don't support Opus so we prioritise G722 for "HD" Voice Quality: {{:yealink-t42g-account-codecs.png?direct&800|}} ===== Configure Busy Lamps ===== To configure Busy Lamps (BLFs) navigate to ''DssKey'' in the web interface and select an available Line Key. Configure it as shown below, remembering to update the extension number and label: {{:yealink-t42g-blf.png?direct&800|}} ===== Configure the LDAP Directory ===== To configure the LDAP Directory navigate to ''Directory > LDAP'' in the web interface and complete as shown in the screenshot below. Note the directory is unauthenticated so username and password can be set to anything. See the notes underneath for the cropped fields. {{::yealink-t42g-ldap-directory.png?direct&800|}} * **LDAP Name Filter**: ''(&(telephoneNumber=*)(displayName=%))'' * **LDAP Number Filter**: ''(&(telephoneNumber=%)(displayName=*))'' You then need to add the LDAP directory to the list of available directories. Navigate to ''Directory > Setting'' in the web interface and complete as shown in the screenshot below: {{:yealink-t42g-directory-settings.png?direct&800|}} To use the Directory, press the Directory key on the phone and select the OARC option. You can then scroll through the entries, or search. {{tag>[sip_config]}}