https://wiki.oarc.uk/ 2026-04-29T00:38:21+00:00 https://wiki.oarc.uk/ https://wiki.oarc.uk/_media/wiki:logo.png text/html 2025-04-22T02:33:58+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:aprsmessageserverhelp?rev=1745289238&do=diff APRS Message Server Help A The /A command lists the APRS announcements received by the router They are listed in alphabetical order by sender. Announcements have a destination address of the form BLNxCCCCC where x represents a single non-digit and CCCCC represents the category (up to 5 characters). They are transmitted once per hour for 4 days, and incoming announcements are retained for 4 days after last reception. text/html 2025-04-22T02:34:22+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:chatserverhelp?rev=1745289262&do=diff Chat Server Help ALERT The /ALERT command, which may be shortened to /A, is used to enable or disable channel join/leave alerts. Syntax: /A[lert] [ON | OFF] Examples: /A Reports current on / off state. /ALERT ON Turns alerts on. If ALERT is ON, the server sends you a notification every time someone joins or leaves the channel (room) you are in. This is the default setting. text/html 2025-04-22T02:34:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:ftpserverhelp?rev=1745289284&do=diff FTP Server Help ABOR COMMAND ABOR SYNOPSIS Abort data connection. SYNTAX ABOR DESCRIPTION The ABOR command tells the server to abort any data transfer currently in progress and close the data connection. The control connection is not closed. If the data connection is not open, this command has no effect. text/html 2025-04-22T02:35:06+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:generalhelp?rev=1745289306&do=diff General Help AMSG The AMSG command switches you into "APRS Messaging" mode, enabling you to exchange messages and bulletins with APRS and UI-View users. Syntax is "AM[sg] <port>", where <port> is the number of the radio port on which traffic will be sent and received. e.g. "AM 13" will use port 13. APRS Messaging mode has it's own help system. text/html 2025-04-22T02:35:29+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:mailboxhelp?rev=1745289329&do=diff Mailbox Help BYE The BYE command disconnects you from the mailbox Syntax: B[ye] If you accessed the mailbox from the node using the "PMS" or "BBS" command, you will be returned to the node, otherwise you will be disconnected. CB The CB (Copy to Bulletin) command makes a copy of a message and sends the copy as a bulletin. Syntax: CB <msg_number> <topic>[@ distribution] The argument <msg_number> must refer to a bulletin, or to a private message that you are allowed to read. The copy … text/html 2025-04-26T21:38:15+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:man1?rev=1745703495&do=diff Section 1 - General Commands ACL ACL(1) XROUTER REFERENCE MANUAL 23/10/2023 COMMAND ACL -- IP Access Control List commands SYNOPSIS AC[l] D[eny] <source> <destination> [protocol] AC[l] L[og] [0-3] AC[l] M[ove] <rule number> <U[p] | D[own]> AC[l] P[ermit] <source> <destination> [protocol] AC[l] R[emove] <rule number> AC[l] V[iew] text/html 2025-04-26T21:38:46+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:man2?rev=1745703526&do=diff Section 2 - Chat Server Commands * < Back to Index ---------- text/html 2025-04-26T21:39:12+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:man3?rev=1745703552&do=diff Section 3 - PZTDOS Commands CD CD(3) XROUTER REFERENCE MANUAL 16/10/2023 COMMAND CD -- Change Working Directory (PZTDOS) SYNOPSIS CD <[drive:]<dir> DESCRIPTION The CD command changes the "working directory" to the one specified by <dir>. If <dir> is an absolute pathname, beginning with \ or /, it is used as specified, otherwise it is interpreted relative to the current working director… text/html 2025-04-26T21:41:23+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:man4?rev=1745703683&do=diff Section 4 - Mailbox Commands BYE BYE(4) XROUTER REFERENCE MANUAL 29/3/2024 COMMAND BYE -- Graceful Session Termination. SYNOPSIS B[ye] DESCRIPTION The BYE command disconnects you from the mailbox. If you accessed the mailbox from the node using the "PMS" or "BBS" command, you will be returned to the node, otherwise you will be disconnected. text/html 2025-04-26T21:42:02+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:man6?rev=1745703722&do=diff Section 6 - Installation and Configuration Topics AGWHOST AGWHOST(6) XROUTER REFERENCE MANUAL 27/9/2023 NAME AGWHOST -- AGW Application Support. DESCRIPTION XRouter provides an AGW TCP host mode interface, allowing apps such as UI-View, which would normally use AGW Packet Engine, (AGWPE) to use XRouter instead. You should not confuse this with XRouter's AGW *interface*, which allows XRouter to interface wi… text/html 2025-04-26T21:42:33+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:man7?rev=1745703753&do=diff Section 7 - Configuration Directives ACTIONCOLOR ACTIONCOLOR(7) XROUTER REFERENCE MANUAL 26/10/2023 NAME ACTIONCOLOR -- Colour For XRouter Actions and Events. SYNOPSIS ACTIONCOLOR=<colour> DESCRIPTION text/html 2025-04-26T21:43:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:man8?rev=1745703783&do=diff Section 8 - Configuration and System Files ACCESS.SYS ACCESS.SYS(8) XROUTER REFERENCE MANUAL 28/2/2025 NAME ACCESS.SYS -- Telnet Access Control File. DESCRIPTION This optional file is read only at bootup. It specifies TCP/IP access requirements according to the caller's IP address. If not present, the default action is for logins to require a valid callsign only. text/html 2025-04-26T21:43:34+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:man9?rev=1745703814&do=diff Section 9 - Miscellaneous Topics AD-HOC AD-HOC(9) XROUTER REFERENCE MANUAL 26/9/2023 NAME AD-HOC -- Ad-Hoc Networking. DESCRIPTION "Ad-hoc" networking (AHN) is a variant of AXUDP linking. It differs from "normal" AXUDP in that the UDP/IP parameters of the link partners are not specified in advance, and instead of "one PORT per link", all AHN links share the same PORT. As the partners' UDP/IP details are no… text/html 2026-01-05T23:36:29+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:parsing?rev=1767656189&do=diff #!/bin/bash ################################## # by Jason G5RKT (not a programmer!) # bash / awk / hammer / nail etc. # License - MIT. Crack on people. # # Script to parse Paula G8PZT's Xrouter MAN and HLP files into DocuWiki # "some simple markup language" (SSML). DocuWiki ML syntax is here: # https://www.dokuwiki.org/wiki:syntax # # The intention is to parse all MAN / HLP files within the folders and # write them with appropriate formatting to files which can then be # pasted directly into th… text/html 2025-04-22T02:35:50+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.oarc.uk/packet:xrouter:docs:pztdoshelp?rev=1745289350&do=diff PZTDOS Help CD Synopsis: The CD command changes the current "working directory". Syntax: CD [path/]<dirname> Description: If [path] is omitted, the target <dirname> is interpreted relative to the current working directory. Forward (/) and backward (\) slashes may be used interchangeably. Pathnames are case-sensitive. Examples: CD FRED Change to subdirectory FRED of current directory CD .. Change up one level to parent directory CD / Change to roo…