Online Amateur Radio Community Wiki

User Tools

Site Tools

Trace:
flight:adsb

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
flight:adsb [2024/08/31 18:23] – [Windows decoding Sept 2023] 2e0gtdflight:adsb [2025/03/14 13:27] (current) – [I am starting afresh] 2m0iig
Line 5: Line 5:
 ====== ADS-B Flight Tracking ====== ====== ADS-B Flight Tracking ======
  
-  * **[[https://adsb.oarc.uk/|OARC Flight Tracker]] - Map of flights being tracked by OARC feeders** - there's also the feed checker, 12 hourly tracks at various altitudes, MLAT sync/map pages, system graphs and stats, and a live log of emergency flights tracked by the service+  * **[[https://adsb.oarc.uk/|OARC Flight Tracker]] - Map of flights being tracked by OARC feeders** - there's also the feed checker, MLAT sync/map pages, system graphs and stats, a list of TCAS-RAs, and a live log of emergency flights tracked by the service
   * [[flight:trackers|Active trackers in OARC]] - Member list of people running flight trackers, with kit info and who they're feeding   * [[flight:trackers|Active trackers in OARC]] - Member list of people running flight trackers, with kit info and who they're feeding
-  * [[flight:squawks|Up to date UK Squawk list]] - Direct from the UK Civil Aviation Authority, and more up to date than the other sources online. Squawks can sometimes provide additional information about a flight+  * [[flight:squawks|Up to date UK Squawk list]] - (WIP!) Direct from the UK Civil Aviation Authority, and more up to date than the other sources online. Squawks can sometimes provide additional information about a flight
  
-**Update: 09/12/2023:** You can now feed HFDL to the OARC tracker! Click [[flight:feedhfdl|here]] for more details.+**Update: 09/12/2023:** You can now feed HFDL to the OARC tracker! Click [[flight:feedhfdl|here]] for more details
  
 **Update: 11/02/2024:** As a result of this HFDL feeding a little issue has cropped up. Some planes have the wrong hex code on HF vs ADS-B! Click [[flight:hfdl-wrong-hexes|here]] to read more about that and our solution to the problems it creates for the tracker. **Update: 11/02/2024:** As a result of this HFDL feeding a little issue has cropped up. Some planes have the wrong hex code on HF vs ADS-B! Click [[flight:hfdl-wrong-hexes|here]] to read more about that and our solution to the problems it creates for the tracker.
Line 45: Line 45:
 Otherwise you'll need a suitable SDR radio (probably an RTL-SDR or similar designed specifically for ADS-B reception) and a suitable Linux system for feeding. This is usually a Raspberry Pi, but it can also be run on normal Linux machines. We'll only cover RTL-SDR-based installs here as that is by far the most popular setup, but you may be able to use other radios with technology such as Soapy SDR or extra drivers. Otherwise you'll need a suitable SDR radio (probably an RTL-SDR or similar designed specifically for ADS-B reception) and a suitable Linux system for feeding. This is usually a Raspberry Pi, but it can also be run on normal Linux machines. We'll only cover RTL-SDR-based installs here as that is by far the most popular setup, but you may be able to use other radios with technology such as Soapy SDR or extra drivers.
  
-**Update 09/09/23:** click [[#windows|here]] for some Windows instructions for decoding/feeding.+**Update 09/09/23:** click [[#windows_decoding_sept_2023|here]] for some Windows instructions for decoding/feeding.
  
 For an antenna you can make something really simple or buy something. A simple 1/4 wave ground plane built around a chassis connector for 1090 MHz connector works well, as does a collinear made from coax segments inside a PVC pipe. Feed the antenna with good coax with decent loss stats at this frequency. You can use cable TV 75 Ohm coax at a push and the loss stats are quite good @ 1090 MHz. For an antenna you can make something really simple or buy something. A simple 1/4 wave ground plane built around a chassis connector for 1090 MHz connector works well, as does a collinear made from coax segments inside a PVC pipe. Feed the antenna with good coax with decent loss stats at this frequency. You can use cable TV 75 Ohm coax at a push and the loss stats are quite good @ 1090 MHz.
Line 70: Line 70:
 After you've done that you can start installing feeder software to send data to OARC and elsewhere. After you've done that you can start installing feeder software to send data to OARC and elsewhere.
  
-Use the script linked above in [[#prerequisites|Prerequisites]] to feed OARC. Visit other websites to find out how to feed those. Generally there'll be a script to download and run. You'll need to provide your location and altitude to any sites that support MLAT if you'd like to send that data also.+Use the script linked above in [[#i_already_have_an_ads-b_setup|Getting Started]] to feed OARC. Visit other websites to find out how to feed those. Generally there'll be a script to download and run. You'll need to provide your location and altitude to any sites that support MLAT if you'd like to send that data also.
  
 There are detailed instructions for the OARC feeder and MLAT clients on the GitHub repo, and the process is  quite automated and prompt-led. You shouldn't need TOO much support as long as your SDR works ok. Useful troubleshooting can be done by checking your system journal/log for messages relating to the loading of the drivers for SDR, as well as commands like lsusb to check connected device status. There are detailed instructions for the OARC feeder and MLAT clients on the GitHub repo, and the process is  quite automated and prompt-led. You shouldn't need TOO much support as long as your SDR works ok. Useful troubleshooting can be done by checking your system journal/log for messages relating to the loading of the drivers for SDR, as well as commands like lsusb to check connected device status.
Line 83: Line 83:
  
 Bear in mind that our coverage isn't the same as the larger websites, your mileage may vary with MLAT tracks. If you think you can fill in a hotspot then please join us! Bear in mind that our coverage isn't the same as the larger websites, your mileage may vary with MLAT tracks. If you think you can fill in a hotspot then please join us!
 +
 ==== Windows decoding Sept 2023 ==== ==== Windows decoding Sept 2023 ====
  
Line 117: Line 118:
 Some instructions to create a new VM: [[https://roboticsbackend.com/install-raspbian-desktop-on-a-virtual-machine-virtualbox/]] Some instructions to create a new VM: [[https://roboticsbackend.com/install-raspbian-desktop-on-a-virtual-machine-virtualbox/]]
  
- NOTE: Make sure your OS is indicated as Debian 32 bit (not 64 bit).  + IMPORTANT NOTE: Make sure your OS is indicated as Debian 32 bit (not 64 bit). 
- NOTE: in order for MLAT to work you must make sure you follow this advice when creating the VM: [[https://discussions.flightaware.com/t/mlat-on-virtualbox-success/77331]]+  
 + IMPORTANT NOTE: in order for MLAT to work you must make sure you follow this advice when creating the VM: [[https://discussions.flightaware.com/t/mlat-on-virtualbox-success/77331]]
  
 Specifically: Specifically:
flight/adsb.1725128604.txt.gz · Last modified: 2024/08/31 18:23 by 2e0gtd