The NinoTNC can be used to send and receive APRS which will allow you to run an iGate, Digipeater or position beacon when used in conjunction with some additional software. As well as contributing to the APRS network, this might be useful to help find local stations you can peer with to help build a national packet network.

This document will cover installing and configuring the software to run as an Rx only iGate, with a periodic position beacon sent via RF. Two software packages are documented, you can chose one or the other. Aprx is lightweight and easy to configure, and BPQ32 is more fully featured but harder to configure.

The guides for both packages assume you're using Raspberry Pi OS or Debian, but may work for other Debian derivatives.

N.B. These are my interpretation of the license. You're encouraged to read and interpret the license yourself.

• A Digipeater will require an NoV as you're re-transmitting third party traffic.
• The ETCC state you require an NoV for a receive only iGate. This is widely disputed, doesn't appear to be backed up by law and frequently ignored. (See aprs.fi to see how many stations are iGating without an NoV… ). That said, anyone with a foundation license or greater can apply for an Rx only iGate, and you get a fancy MB7 callsign.
• If you're beaconing over RF your station will need to be attended unless you have an NoV or you're operating “remotely” ( See license for restrictions on remote operation )

Firstly install some pre-requisites:

sudo apt-get update && apt-get upgrade
sudo apt-get install wget openssl

Next download the latest package. I'm forcing IPv4 only as I had issues when attempting to download via IPv6.

For Raspberry Pi:

wget --inet4-only -O /tmp/aprx.deb https://thelifeofkenneth.com/aprx/debs/aprx_2.9.0_raspi.deb

For amd64:

wget --inet4-only -O /tmp/aprx.deb https://thelifeofkenneth.com/aprx/debs/aprx_2.9.0_amd64.deb

Next install the deb package:

dpkg -i /tmp/aprx.deb