packet-transceiver-wiring
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision | ||
packet-transceiver-wiring [2023/01/02 19:37] – [Yaesu 6 pin mini DIN radios] m0lte | packet-transceiver-wiring [2023/04/03 21:56] – m0lte | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Transceiver Connections ====== | + | Moved to [[packet:cables|packet: |
- | + | ||
- | ===== Yaesu 6 pin mini DIN radios ===== | + | |
- | + | ||
- | A common standard for Yaesu radios is the 6 pin mini DIN plug. The easiest way to get a wired 6 pin mini DIN plug is to buy a plug-to-plug cable, commonly available on eBay, for around £5-6, and cut it in half. Then you have two! | + | |
- | + | ||
- | All you need to do then is work out (with a multimeter) which pin corresponds to each wire, and tack them to the pins on a 9 pin D shell plug as follows: | + | |
- | + | ||
- | ^ Yaesu pin ^ Connection | + | |
- | | | + | |
- | | 2 | Ground | + | |
- | | 3 | PTT | + | |
- | | 4 | Receive audio (9600 baud) | 5 (option) | + | |
- | | 5 | Receive audio (1200 baud) | 5 (option) | + | |
- | | 6 | Squelch | + | |
- | + | ||
- | Pick pin 4 if you'll be using 9600 baud, or pin 5 if you're using 1200 baud. You might be able to use pin 4 for 1200 baud as well. | + |