packet-transceiver-wiring
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
packet-transceiver-wiring [2023/01/02 19:37] – [Yaesu 6 pin mini DIN radios] m0lte | packet-transceiver-wiring [2023/04/09 12:55] (current) – removed m0lte | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Transceiver Connections ====== | ||
- | ===== Yaesu 6 pin mini DIN radios ===== | ||
- | |||
- | A common standard for Yaesu radios is the 6 pin mini DIN plug. The easiest way to get a wired 6 pin mini DIN plug is to buy a plug-to-plug cable, commonly available on eBay, for around £5-6, and cut it in half. Then you have two! | ||
- | |||
- | All you need to do then is work out (with a multimeter) which pin corresponds to each wire, and tack them to the pins on a 9 pin D shell plug as follows: | ||
- | |||
- | ^ Yaesu pin ^ Connection | ||
- | | 1 | Transmit audio | 1 | | ||
- | | 2 | Ground | ||
- | | 3 | PTT | ||
- | | 4 | Receive audio (9600 baud) | 5 (option) | ||
- | | 5 | Receive audio (1200 baud) | 5 (option) | ||
- | | 6 | Squelch | ||
- | |||
- | Pick pin 4 if you'll be using 9600 baud, or pin 5 if you're using 1200 baud. You might be able to use pin 4 for 1200 baud as well. |
packet-transceiver-wiring.1672688235.txt.gz · Last modified: 2023/01/02 19:37 by m0lte