Online Amateur Radio Community Wiki

User Tools

Site Tools

Trace:
packet:bpq_commands

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
packet:bpq_commands [2025/05/25 19:38] – gi3jmcpacket:bpq_commands [2026/08/07 20:58] (current) – Mort upgrade: tighten emphasis markers so they parse again 0.0.0.0
Line 89: Line 89:
 ''MH P Call'' ''MH P Call''
  
-//Example - //''MH 1'' - List all stations heard on port 1\\ +//Example -//''MH 1'' - List all stations heard on port 1\\ 
-//Example - //''MH 1 GB'' - List all stations heard on port 1 with GB in the callsign\\+//Example -//''MH 1 GB'' - List all stations heard on port 1 with GB in the callsign\\
  
 **MHV** lists stations in a table format with more detail.\\ **MHV** lists stations in a table format with more detail.\\
 **MHU**/**MHL** Lists stations with UTC/Local timestamps instead of time since last heard. **MHU**/**MHL** Lists stations with UTC/Local timestamps instead of time since last heard.
  
-SYSOPs can replace the call filter with 'CLEAR' to erase the MHeard lists. //Example - //''MH 1 CLEAR''+SYSOPs can replace the call filter with 'CLEAR' to erase the MHeard lists. //Example -//''MH 1 CLEAR''
  
 //Sample Output//\\ //Sample Output//\\
Line 125: Line 125:
 <code>LIS P1 P2 P3....</code> <code>LIS P1 P2 P3....</code>
  
-//Example - // ''LIS 1 2'' starts traffic monitoring for ports 1 & 2+//Example -// ''LIS 1 2'' starts traffic monitoring for ports 1 & 2
  
 While listening on a single port, **CQ** will send a beacon under the users callsign. While listening on a single port, **CQ** will send a beacon under the users callsign.
Line 177: Line 177:
 These commands allow for the temporary disabling of a given port. These commands allow for the temporary disabling of a given port.
  
-//Example - // ''STOPPORT 2'' will disable the use of port 2\\ +//Example -// ''STOPPORT 2'' will disable the use of port 2\\ 
-//Example - // ''STARTPORT 2'' will enable the use of port 2+//Example -// ''STARTPORT 2'' will enable the use of port 2
  
 ---- ----
Line 203: Line 203:
 <code>ROUTES Callsign Port# Parameters</code> <code>ROUTES Callsign Port# Parameters</code>
  
-//Example - // ''ROUTES G8BPQ-2 2 100''   - Set a route for G8BPQ-2, on port 2, with quality at 100\\ +//Example -// ''ROUTES G8BPQ-2 2 100''   - Set a route for G8BPQ-2, on port 2, with quality at 100\\ 
-//Example - // ''ROUTES G8BPQ-2 2 !''   - Set a route for G8BPQ-2, on port 2, and toggle 'Locked Route' flag\\ +//Example -// ''ROUTES G8BPQ-2 2 !''   - Set a route for G8BPQ-2, on port 2, and toggle 'Locked Route' flag\\ 
-//Example - // ''ROUTES G8BPQ-2 2 100 !''   - Set a route for G8BPQ-2, on port 2, with quality at 100 and toggle 'locked' flag\\+//Example -// ''ROUTES G8BPQ-2 2 100 !''   - Set a route for G8BPQ-2, on port 2, with quality at 100 and toggle 'locked' flag\\
  
 ---- ----
Line 238: Line 238:
 Each of the commands listed above either update or display that setting for the specified port. Each of the commands listed above either update or display that setting for the specified port.
  
-//Example - // ''PACLEN 1 100'' sets the default maximum packet length for port 1 +//Example -// ''PACLEN 1 100'' sets the default maximum packet length for port 1 
-//Example - // ''PERSIST 2'' displays the current 'probability to retransmit' value for port 2+//Example -// ''PERSIST 2'' displays the current 'probability to retransmit' value for port 2
  
 ''VALIDCALL'' is also available.  It is not possible to update the list, but it can be displayed. ''VALIDCALL'' is also available.  It is not possible to update the list, but it can be displayed.
packet/bpq_commands.txt · Last modified: by 0.0.0.0