Differences

This shows you the differences between two versions of the page.

--- packet:bpq_commands [2025/04/14 16:44] – [SENDNODES] gi3jmc
+++ packet:bpq_commands [2025/04/14 17:08] (current) – [MHEARD] gi3jmc
@@ Line 73: / Line 73: @@
 **MH**eard lists the stations that have been heard on a port
-''MH P Call|CLEAR''
+''MH P Call''
 //Example - //''MH 1'' - List all stations heard on port 1\\
 //Example - //''MH 1 GB'' - List all stations heard on port 1 with GB in the callsign\\
-//Example - //''MH 1 CLEAR'' - Erases the list of stations heard on port 1
 **MHV** lists stations in a table format with more detail.\\
 **MHU**/**MHL** Lists stations with UTC/Local timestamps instead of time since last heard.
+SYSOPs can replace the call filter with 'CLEAR' to erase the MHeard lists. //Example - //''MH 1 CLEAR''
 //Sample Output//\\
@@ Line 204: / Line 205: @@
 ----
 === KISS ===
+**KISS** sends a KISS command/value pair.  Parameters required are port, command, and value all specified in decimal
+''KISS 1 2 3''
 ----
 === Port Parameters ===
+''TXDELAY, MAXFRAME, FRACK, RESPTIME, PPACLEN, RETRIES,\\
+QUALITY, PERSIST, TXTAIL, XMITOFF, DIGIFLAG, DIGIPORT,\\
+MAXUSERS, L3ONLY, BBSALIAS, FULLDUP, SOFTDCD''
+Each of the commands listed above either update or display that setting for the specified port.
+//Example - // ''PACLEN 1 100'' sets the default maximum packet length for port 1
+//Example - // ''PERSIST 2'' displays the current 'probability to retransmit' value for port 2
+''VALIDCALL'' is also available.  It is not possible to update the list, but it can be displayed.
+Further details of the permitted values for the parameters above can be found in the bpq32.cfg documentation available [[https://www.cantab.net/users/john.wiseman/Documents/BPQCFGFile.html|here]]
 ----
 === System Parameters ===
+''REMDUMP, OBSINIT, OBSMIN, NODESINT, L3TTL,\\
+L4RETRIES, L4TIMEOUT, T3, NODEIDLETIME, LINKEDFLAG,\\
+IDINTERVAL, MINQUAL, FULLCTEXT, HIDENODES, L4DELAY,
+L4WINDOW, BTINTERVAL''
+Each of the commands listed above either update or display that setting for the node.
+Further details of the permitted values for the parameters above can be found in the bpq32.cfg documentation available [[https://www.cantab.net/users/john.wiseman/Documents/BPQCFGFile.html|here]]