Online Amateur Radio Community Wiki

User Tools

Site Tools

Trace:
packet:ft-450d

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
packet:ft-450d [2024/02/15 18:05] – [TNC cable] m0ltepacket:ft-450d [2024/04/07 17:21] – m0lte
Line 2: Line 2:
  
 160m to 6m with ATU capable of matching 3:1, 100W. RS232 CAT control. 6 pin mini DIN data port. Easily modified for RF or IF output to an SDR using a HupRF board. 160m to 6m with ATU capable of matching 3:1, 100W. RS232 CAT control. 6 pin mini DIN data port. Easily modified for RF or IF output to an SDR using a HupRF board.
 +
 +{{ :radios:yaesu-ft-450d-manual.pdf | FT-450D user manual }} 
 +
 +{{ :radios:yaesu-ft-450d-service-manual.pdf | FT-450D service manual}}
 +
  
 ===== TNC cable ===== ===== TNC cable =====
Line 29: Line 34:
 Previously there was an article here involving a full isolation circuit with relay powered by DC brought out from the TNC, but this has proven to not be necessary. Previously there was an article here involving a full isolation circuit with relay powered by DC brought out from the TNC, but this has proven to not be necessary.
  
 +{{tag>radio packet hf}}
 +
 +===== Errata =====
 +
 +M0GZP has found, empirically, that both the input and output pins should perhaps be documented at 60mV instead of 500mV. This is why the NinoTNC SIGNALS settings of 0000 works for this radio, which is unexpected.
packet/ft-450d.txt · Last modified: 2024/05/02 20:20 by m0lte