Differences

This shows you the differences between two versions of the page.

--- packet:linbpq-apt-installation [2024/03/19 10:44] – [LinBPQ Installation using apt] m0lte
+++ packet:linbpq-apt-installation [2024/04/06 17:49] – [Configuration] m0lte
@@ Line 53: / Line 53: @@
 ===== Configuration =====
-A default config file will be placed at /etc/bpq32.cfg for editing.
+A default config file will need to be placed at ''/etc/bpq32.cfg'' before bpq will start.
-Simple config file suitable for a basic node with a single KISS modem, e.g. NinoTNC: https://gist.github.com/M0LTE/52824537b3fe21d19baf9a66eda4db86
+We ship a simple config file suitable for a basic node with a single KISS modem with the package in `/usr/share/doc/linbpq/examples/bpq32.cfg`, taken from: https://gist.github.com/M0LTE/52824537b3fe21d19baf9a66eda4db86
 <code>
-wget -q https://gist.githubusercontent.com/M0LTE/52824537b3fe21d19baf9a66eda4db86/raw/fde7d76562bc26306543c4f7ea10ea55f509ac57/bpq32.cfg
+sudo cp /usr/share/doc/linbpq/examples/bpq32.cfg /etc/bpq32.cfg
 # edit as required, then:
-sudo mv bpq32.cfg /etc/bpq32.cfg
-</code>
-If you fully replace the config file, as opposed to editing the existing one, ensure it has the correct ownership after you do so:
-<code>
 sudo chown :linbpq /etc/bpq32.cfg
 sudo chmod 644 /etc/bpq32.cfg