Differences

This shows you the differences between two versions of the page.

--- packet:ninotnc [2024/04/01 16:42] – [Cheat sheet] m0lte
+++ packet:ninotnc [2024/04/01 16:49] – 2e0hkd
@@ Line 67: / Line 67: @@
 ^ Radio              ^ Signals ^ Notes ^
-| Yaesu FT-450D      | 0000    ^ Requires low level TX audio - the FT-450D is very sensitive. RX audio setting probably doesn't matter, control with appropriate RF gain / AGC, but off/down works. |
+| Yaesu FT-450D      | 0000    | Requires low level TX audio - the FT-450D is very sensitive.\\  RX audio setting probably doesn't matter, control with appropriate RF gain / AGC, but off/down works. |
-| Tait TM8100 / 8200 | 1100    | Requires high level TX audio, else the transmitted audio is too quiet in the range of the pot. Requires low level RX audio, else CRC is always lit. Requires AC coupling to block the DC which is present on the TX audio pin. |
+| Tait TM8100 / 8200 | 1100    | Requires high level TX audio, else the transmitted audio is too quiet in the range of the pot.\\ Requires low level RX audio, else CRC is always lit. \\ Requires AC coupling to block the DC which is present on the TX audio pin. |
+| Tait T2010 | 1100    |  |
 ==== Switch 1 - Transmit audio range selection - DATA/MIC ====