Differences

This shows you the differences between two versions of the page.

--- packet:ninotnc [2024/04/02 07:52] – [Cheat sheet] 2e0ijc
+++ packet:ninotnc [2024/05/13 17:48] (current) – [Cheat sheet] m0lte
@@ Line 71: / Line 71: @@
 | Tait T2010 | 1100    |  |
 | Yaesu FTM-300D | 1100    | Tested up to Modes 0100 4800 GFSK IL2P+CRC |
+| Kenwood TK-90 | 0100 | TX audio is pretty sensitive, works better in mic range. |
 ==== Switch 1 - Transmit audio range selection - DATA/MIC ====
@@ Line 277: / Line 278: @@
 </file>
 After creating said file, run ''udevadm trigger'' for it to take effect without rebooting.
+If this doesn't work immediately, it may be the NinoTNC is not configured to expose its serial number. This can be enabled using the tool at https://github.com/g5dsg/2221aTool.
+''git clone https://github.com/g5dsg/2221aTool.git''
+''sudo python3 ./2221aTool.py enum-serial 1''
+If preferred, the same tool can be used to specify a serial number for the device.
+''sudo python3 ./2221aTool.py set-serial 0123456789''
+Then rerun the udevadm trigger command above.
 ==== Auto mode switch ====