Online Amateur Radio Community Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Packet on (tr)uSDX ======

Anthony M7TAW has successfully got this running on 40m HF Packet. Please note as this transceiver is QRP, it is not the optimal setup, but if you pray to the sun gods it can work. 

==== M7TAW current setup ====

Raspberry Pi --> [[https://digirig.net/| Digirig]] --> [[https://digirig.net/product/usdx-cable-for-digirig-mobile | uSDX Digirig audio cable]] --> (tr)uSDX.


=== Raspberry Pi setup ===

When Digirig is plugged into the raspberry pi via USB, the input and output devices required for audio will show as "USB Audio Device". Example below for QtSoundModem. 

{{:packet:qtsm_digirig_linux.png?400|}}

Your PTT Port will be the ttyUSBx currently being occupied by the Digirig device. You can run ''ls -l /dev/serial/by-id'' in a terminal to find out - the device will be named "usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller" or something similar. 

=== (tr)uSDX setup ===

To connect the radio, simply connect the audio cable into the audio port of the Digirig, and then connect the Green jack to the Audio port and the Red jack to the PTT/Key port as below. 

{{:packet:trusdx_digirig.png?400|}}

{{tag>radio packet hf}}