Online Amateur Radio Community Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=======Mailbox Help=======
=====BYE=====
<code>
The BYE command disconnects you from the mailbox
    Syntax: B[ye]
If you accessed the mailbox from the node using the "PMS" or "BBS"
command, you will be returned to the node, otherwise you will be
disconnected.
</code>
=====CB=====
<code>
The CB (Copy to Bulletin) command makes a copy of a message and sends
the copy as a bulletin.
   Syntax: CB <msg_number> <topic>[@ distribution]
The argument <msg_number> must refer to a bulletin, or to a private
message that you are allowed to read. The copy is always a bulletin,
even if the original was a private message.
   Examples: CB 123 TECH
             CB 456 PACKET @ GBR
See also: CP
</code>
=====CP=====
<code>
The CP (Copy to Private) command makes a copy of a message and sends
it to someone else as a private message.
   Syntax: CP <msg_number> <to_callsign>[@ BBS etc]
The argument <msg_number> must refer to a bulletin, or to a private
message that you are allowed to read. The copy is always private,
even if the original was a bulletin.
   Examples: CP 123 G8PZT
             CP 456 G4FPV @ GB7GLO.#46.GBR.EU
See also: CB
</code>
=====HELP=====
<code>
The HELP command, which may be abbreviated to H, displays help for
mailbox commands and related topics.
   Syntax: H[elp] [cmd | topic]
HELP by itself gives directions on how to access help.
If the argument is a command name or topic, the help file for that
command or topic is displayed.  The argument "*" lists the available
help topics.
   Examples:  H *   - List available help topics.                               
              H KM  - Displays help for the KM command.
See also: I (info)
</code>
=====IC=====
<code>
The IC command lists WP entries matching a given callsign.
   Syntax: IC <callsign>
If the argument is a callsign (wildcards allowed), the IC command
queries the White Pages (WP) database and displays any users with
a matching callsign.
   Examples: IC G4*   - List users whose callsign begins with G4
             IC G8PZT - Display WP record for G8PZT
See also: I, I@, IH, IN, IQ, IZ
</code>
=====IH=====
<code>
The IH command lists WP entries whose hierarchical address contains a
specified string of characters.
   Syntax: IH <haddr>
Wildcards are NOT allowed. This command performs a "sliding" match,
so for example "IH GBR" displays systems in GBR and GBR.EU.
   Examples: IH #24 - List WP entries whose haddress contains #24
             IH GBR - List WP entries in GBR
See also: I, I@, IC, IN, IQ, IZ
</code>
=====I@=====
<code>
The I@ command lists users with a given "home" BBS.
   Syntax: I@ <bbs>
If the argument is a BBS callsign (wildcards allowed), the I@ command
queries the White Pages (WP) database and displays any users who have
nominated that BBS as their "home" BBS.
   Examples: I@ GB7*   - List users whose home BBS begins with GB7
             I@ GB7BDX - List users whose home BBS is GB7BDX
See also: I, IC, IH, IN, IQ, IZ
</code>
=====INFO=====
<code>
The INFO command, which may be abbreviated to I, displays information
about the mailbox or other users.
   Syntax: I[nfo] [callsign]
If no arguments are supplied, the I command displays general
information about the mailbox and other I commands.
If the argument is a callsign, White Pages (WP) data for that callsign
is displayed, if available. Wildcards are allowed. The argument "*"
displays the entire WP database (long list)
   Examples: INFO    - Display mailbox information.
             I g8pzt - Display WP information for G8PZT
             I G4*   - Display WP data for all G4 callsigns
See also: I@, IC, IH, IN, IQ, IZ
</code>
=====IN=====
<code>
The IH command lists WP (White Pages) entries with a specified name.
   Syntax: IN <name>
Wildcards are allowed.
   Examples: IN Roger - List WP entries with name Roger
             IN Will* - List WP entries with Will in the name
See also: I, I@, IC, IH, IQ, IZ
</code>
=====IQ=====
<code>
The  IQ  command queries the White Pages database for all packet users
who have the specified character string as part of their QTH.
   Syntax: IQ <qth>
Case-independent. Wildcards NOT allowed. Performs a "sliding" match.
   Examples: IQ Kidderminster - Lists users in Kidderminster.
             IQ amb  - Lists users in Ambridge, Cambridge, Camborne 
See also: I, I@, IC, IH, IN, IZ
</code>
=====IZ=====
<code>
The  IZ  command queries the White Pages database for all users who
have the specified ZIP code.  (Note that in the UK we use Maidenhead
locators or postcodes, not Zip codes)
   Syntax: IZ <zip | locator>
The argument is case-independent. Wildcards are accepted.
   Examples: IZ IO82*  - List all users in this major square
             IZ DY*    - List users in the Dudley postcode area
Type  H WPAGES  for more information about the White Pages database.
See also: I, I@, IC, IN, IQ, IZ
</code>
=====J=====
<code>
The J command lists the recent connections to the mailbox.
   Syntax: J [max]
Only the most recent connect by each callsign is shown, along with
the date and time of their last connection, and the length of time
they were connected.
   Example: J 3 - Display the 3 most recent connections
</code>
=====K=====
<code>
The K (kill) commands are used to delete messages from the mailbox.
The variants available to non-sysops are as follows:
   K[ill] <n ...>  -- Kill message(s) by number
   K> <to>         -- Kill message(s) TO destination
   K< <from>       -- Kill message(s) FROM a callsign
   KM              -- Kill mail addressed to you that has been read
Each of the above commands has its own help page.
See also: "H KILL", "H K>", "H K<" and  "H KM"
</code>
=====K<=====
<code>
The K< (KillFrom) command kills (deletes) messages originated FROM a
callsign. Users may only kill messages sent by themselves.
   Syntax: K< <callsign>
The argument is case-independent. Wildcards are accepted.
   Example: K< G8PZT  - Kill messages from G8PZT
See also: K, KILL,  K>,  KM
</code>
=====K>=====
<code>
The K> (KillTo) command kills (deletes) messages addressed TO a
callsign or topic, provided they were sent by you.
   Syntax: K> <callsign | topic>
The argument is case-independent. Wildcards are accepted.
   Examples: K> G8PZT  - Kill messages from you to G8PZT
             K> HELP   - Kill messages from you to topic HELP
See also: K, KILL, K<,  KM
</code>
=====KILL=====
<code>
The KILL command, which may be abbreviated to K, kills (deletes) one
or more messages from the mailbox.
   Syntax: K[ill] <n1 [n2 n3 ...]>
You may only kill messages originated by, or addressed to, yourself.
   Examples: KILL 375   -- Kill message 375
             K 23 47 92 -- Kill multiple messages
See also: K,  K>,  K<, KM
</code>
=====KM=====
<code>
The  KM  (KillMine) command kills (deletes) mail addressed to you, but
only if you have read it.
   Syntax: KM
See also: K, KILL,  K>,  K<
</code>
=====L$=====
<code>
The L$ (ListUnforwarded) command lists messages that are waiting to be
forwarded to other mailboxes. These messages have the status "$".
   Syntax: L$ [to]
The optional argument should be a callsign or a bulletin topic, and
is case-insensitive. Wildcards are accepted.
   Examples: L$ SYSOP - List unforwarded mail addressed to SYSOP
             L$ TECH* - List unforwarded mail to TECH and TECHNI
See also:  L>, L<, L@, LA, LB, LC, LF, LIST LL, LM, LN, LP,
           LR, LS, LT, LU
</code>
=====LA=====
<code>
The LA (ListAncient) command lists the oldest messages, from the
oldest towards the newest.
   Syntax: LA <max>
<max> specifies the maximum number of messages to display.
Don't ask why it's "ListAncient" not "ListOldest" - It has always been
so. The reason is lost in the mists of time! 
   Example: LA 25 - List the oldest 25 messages
See also: L>, L<, L@, L$, LB, LC, LF, LIST, LL, LM, LN, LP,
          LR, LS, LT, LU
</code>
=====LB=====
<code>
The LB (List Bulletins) command lists the most recent bulletins in
reverse order, i.e. newest first.
   Syntax: LB [max]
Optional argument [max] specifies the maximum number of bulletins to
list, and defaults to 25.
   Examples: LB     - List the most recent 25 bulletins
             LB 100 - List the most recent 100 bulletins
See also: L>, L<, L@, L$, LA, LC, LF, LIST, LL, LM, LN, LP,
          LR, LS, LT, LU
</code>
=====LC=====
<code>
The LC (List Categories) command lists all the bulletin categories
(aka topics), together with total number of bulletins in each.
   Syntax: LC [category]
The optional case-independet argument can be used to narrow the
search. Wildcards are accepted.
   Examples: LC    - List all bulletin categories
             LC A* - List categories that begin with the letter 'A'
See also: L>, L<, L@, L$, LA, LB, LF, LIST, LL, LM, LN, LP, LR, LS,
          LT, LU
</code>
=====LF=====
<code>
The LF (List Forwarded) command lists messages that were successfully
forwarded to another mailbox.
   Syntax: LF [to]
The optional case-independent argument can be used to narrow the
search, based on the "to" field or bulletin "category" (topic).
Wildcards are accepted.
   Examples: LF       - List all forwarded messages
             LF TECH* - List forwarded messages to TECH or TECHNI
See also:  L>, L<, L@, L$, LA, LB, LC, LIST, LL, LM, LN, LP, LR, LS,
           LT, LU
</code>
=====L=====
<code>
The L (List) commands are used to display lists of messages.
The variants available to non-sysops are as follows:
   L[ist]          List messages and bulletins.
   L[ist] <n>      List messages starting at number <n>
   L[ist] <f> <l>  List messages from numbers <f> to <l> 
   L> <to>         List messages TO callsign or category
   L< <from>       List messages FROM callsign
   L@ <at>         List messages AT a distribution
   L$ [to]         List messages waiting to be forwarded
   LA <n>          List oldest <n> messages 
   LB [n]          List [max of n] Bulletins backwards
   LC [cat]        List bulletin categories
   LF [to]         List sucessfully Forwarded messages
   LL <n>          List the Last (most recent) <n> messages 
   LM              List Mine (all messages addressed to you)
   LN              List New (unread) mail addressed to you 
   LP [n]          List [max of n] Private messages
   LR [to]         List private mail that has been read
   LS <text>       List messages whose subject contains <text>
   LT <text>       List messages containing <text> in body
   LU [to]         List Unread messages
Each of the above commands has its own help page.
See also: LIST, L>, L<, L@, L$, LA, LB, LC, LF, LL, LM, LN, LP,
                LR, LS, LT, LU
</code>
=====L<=====
<code>
The L< (ListFrom) command lists messages originated by a specified
callsign.
   Syntax: L< <callsign>
The argument is case-independent. Wildcards are accepted. Private
mail is only displayed to the intended recipient.
   Example: L< G8PZT  - List all messages from G8PZT
            L< VK*    - List all messages from Australians
See also: L>, L@, L$, LA, LB, LC, LF, LIST, LL, LM, LN, LP,
          LR, LS, LT, LU
</code>
=====L>=====
<code>
The L> (List To) command lists messages addressed TO a callsign or
topic.
   Syntax: L> <callsign | topic>
The argument is case-independent. Wildcards are accepted. Personal
mail may only be listed by its addressee.
   Examples: L> G8PZT  - List messages from you to G8PZT
             L> PACKET - List messages from you to topic PACKET
See also: L, L<, L@, L$, LA, LB, LC, LF, LIST, LL, LM, LN, LP,
          LR, LS, LT, LU
</code>
=====L@=====
<code>
The L@ (List At) command lists bulletins targetted AT a specified
distribution area.
   Syntax: L@ <distribution>
The argument is case-independent. Wildcards are accepted.
   Examples: L@ GBR  - List messages with GBR distribution area
             L@ EU*  - List messages with EU or EURO distribution
See also: L>, L<, L$, LA, LB, LC, LF, LIST, LL, LM, LN, LP, LR, LS,
          LT, LU
</code>
=====LIST=====
<code>
The LIST command, which may be abbreviated to "L", is used to list
messages.
   Syntax:  L[ist] List upwards from your previous "last-listed" 
            L[ist] <n>      List messages starting at number <n>
            L[ist] <f> <l>  List messages from numbers <f> to <l> 
L[ist] by itself lists messages that have arrived since you last used
the L command, which may be none.
See also: L>, L<, L@, L$, LA, LB, LC, LF, LL, LM, LN,
          LP, LR, LS, LT, LU
</code>
=====LL=====
<code>
The LL (List Latest) command lists the most recent messages in reverse
order, i.e. newest first. It is similar to LB, except that it includes
all types of message, not just bulletins.
   Syntax: LL <max>
The argument <max> specifies the maximum number of messages to
display.
   Example: LL 10  - List the latest 10 messages.
See also: L>, L<, L@, L$, LA, LB, LC, LF, LIST, LM, LN, LP, LR, LS,
          LT, LU
</code>
=====LM=====
<code>
The LM (List Mine) command is similar to LN (List New) in that it
lists all messages addressed to you, except that it includes the
messages you have read.
   Syntax: LM 
See also: L>, L<, L@, L$, LA, LB, LC, LF, LIST, LL, LN, LP, LR, LS,
          LT, LU
</code>
=====LN=====
<code>
The LN (List New) command lists unread messages addressed to you.
   Syntax: LN
To see ALL mail addressed to you, whether it has been read or not,
use LM (List Mine).
See also: L>, L<, L@, L$, LA, LB, LC, LF, LIST, LL, LM, LP, LR, LS,
          LT, LU, RN
</code>
=====LO=====
<code>
The LO (List Oldest) command lists the oldest messages, from the
oldest towards the newest. It is identical to the LA command.
   Syntax: LO <max>
<max> specifies the maximum number of messages to display.
   Example: LO 25 - List the oldest 25 messages
See also: L>, L<, L@, L$, LA, LB, LC, LF, LIST, LL, LM, LN, LP,
          LR, LS, LT, LU
</code>
=====LP=====
<code>
The LP (List Private) command lists private messages, provided they
were sent by, or to, yourself.
   Syntax: LP [max]
The optional [max] argument specifies the maximum number of messages
to list. The default is 25.
   Example: LP 10 - List a maximum of 10 private messages.
See also: L>, L<, L@, L$, LA, LB, LC, LF, LIST, LL, LM, LN, LR, LS,
          LT, LU
</code>
=====LR=====
<code>
The LR (List Read) command lists private messages that have been read.
Non-sysops can only list messages addressed to or from themselves.
   Syntax: LR [to]
The optional case-independent [to] argument can ne used to limit the
search. Wildcards are accepted.
   Examples: LR G8PZT  - List private messages to G8PZT
See also:  L>, L<, L@, L$, LA, LB, LC, LF, LL, LIST, LM, LN, LP,
           LS, LT, LU
</code>
=====LS=====
<code>
The LS (List by Subject) command lists messages with a specified word
or part-word anywhere in the subject.
   Syntax: LS <word>
The argument is case-independent. Wildcards are not allowed.
   Example: LS IBM  - List messages with IBM anywhere in the subject.
See also: L>, L<, L@, L$, LA, LB, LC, LF, LL, LIST, LM, LN, LP, LR,
          LS, LT, LU
</code>
=====LT=====
<code>
The LT (List by Text) lists messages containing a specified word or
part-word anywhere in the message body.
   Syntax: LT <word>
The argument is case-independent. Wildcards and phrases are not
accepted.
   Example: LT Packet - List messages containing the word "packet"
See also: L>, L<, L@, L$, LA, LB, LC, LF, LIST, LL, LM, LN, LP, LR,
          LS, LU
</code>
=====LU=====
<code>
The LU (List Unread) command lists unread private mail, plus bulletins
that have not been forwarded or marked for forwarding.
   Syntax: LU [to]
The case-independent argument [to] can be used to restrict the search.
Wildcards are accepted.
   Examples: LU      - List all unread/unmarked mail
             LU RSGB - List unmarked bulletins addressed to RSGB
See also: L>, L<, L@, L$, LA, LB, LC, LF, LIST, LL, LM, LN, LP, LR,
          LS, LT
</code>
=====M=====
<code>
The M (Mine) command lists all the messages sent by you.
   Syntax: M[ine]
See also: LM (ListMine) KM (KillMine)
</code>
=====NAME=====
<code>
The NAME command, which can be abbreviated to "N"  displays or changes
your first name in the WP (White Pages) database.
   Syntax: N[ame] [name]
The argument is case-independent. Whatever you type, the first
character is auto-capitalised, and the remainder is uncapitalised.
The maximum length for a name is 12 characters.
If no argument is supplied, your current name is shown.
   Examples: N      - Display your name, in the WP database
             N fReD - Change your name to "Fred"
See also: N, NC, NH, NI, NP, NQ, NZ
</code>
=====NC=====
<code>
The NC command displays or sets your ANSI colour preference.
   Syntax: NC [on | off]   
To use colour, you will need an ANSI-compatable terminal such as
XRouter or PuTTY.
The setting is remembered for your subsequent connections.
   Examples: NC    - Display current setting
             NC ON - Set colour on
See also: NAME, NH, NI, NP, NQ, NZ
</code>
=====NH=====
<code>
The NH command allows you to query or change your "Home BBS" in the
White Pages database, i.e. the BBS which you use the most.
   Syntax: NH [bbscall[.hier_address]]
The argument is case-independent. If your home BBS is known to the WP
at this mailbox, you only need to supply its callsign, otherwise you
have to supply the full hierachical address, e.g. "GB7PZT.#24.GBR.EU"
   Examples: NH GB7PZT - changes your HomeBBs to GB7PZT.
             NH        - reports the current setting
See also: NAME, NC, NI, NP, NQ, NZ
</code>
=====N=====
<code>
The N commands are used to display or change your name, and other
attributes, in the mailbox user database.
The variants available to non-sysops are as follows:
   N[ame] [name]   Display or set your name in White Pages
   NC [on | off]   Display/set your ANSI colour preference
   NH [bbs]        Display or set your Home BBS
   NI              Summary of your user record
   NP [lines]      Set pagination [0=off]
   NQ [qth]        Display or set your QTH
   NZ [zip]        Display or set your Zip / Locator
Each of the above commands has its own help page.
See also: NAME, NC, NH, NI, NP, NQ, NZ
</code>
=====NI=====
<code>
The NI (Information) command displays your user account, i.e. the
information that the mailbox holds about you.
   Syntax: NI
Information includes, Name, Qth, Home BBS, when you last connected,
the number of times you have connected, your colour setting, the
number of messages you have read and sent, and your pagination
settings.
See also: NAME, NC, NH, NI, NP, NQ, NZ
</code>
=====NP=====
<code>
The NP (Pagination) command is used to display or adjust your
pagination settings.
   Syntax:  NP [lines]
NP by itself reports the current setting, while "NP <lines>" changes
it. "NP 0" disables pagination.
   Examples: NP    - Enquire current pagination setting
             NP 18 - Set pagination to 18 lines per page
See also: NAME, NC, NH, NI, NQ, NZ
</code>
=====NQ=====
<code>
The NQ (Qth) command displays or changes your QTH in the White Pages
database.
   Syntax: NQ [qth]
The maximum length for QTH is 28 characters. Spaces are allowed.
   Examples: NQ            - Enquire your current QTH
             NQ Botany Bay - Set your QTH to "Botany Bay"
See also: NAME, NC, NH, NI, NP, NZ
</code>
=====NZ=====
<code>
The NZ (Zip) command displays of sets your "zip" code in the White
Pages (WP) database. In the UK we use this field for Maidenhead
Locator.
   Syntax: NZ [zip]
The maximum length for the zip / locator code is 7 characters.
   Examples: NZ        - Display current zip / locator
             NZ IO48TL - Set locator to IO48TL
See also: NAME, NC, NH, NI, NP, NQ
</code>
=====READ=====
<code>
The READ command, which may be shortened to "R", reads one or more
messages by number, without the routing headers (use the RH command
if the headers are wanted).
   Syntax: [R] <number> [number ...]
The "R" is optional - messages can be read simply by entering the
numbers alone.
Non-sysops may only read bulletins, and private mail sent by them or
to them.
   Examples: R 100 147 193 - Read messages 100, 147 and 193
             55 66 77      - Read messages 55, 66 and 77
See also: R>, R<, R@, RH, RM, RN
</code>
=====RH=====
<code>
The RH (Read with Headers) command reads one or more messages, showing
all the routing headers (use the R[EAD] command to omit headers).
   Syntax: RH <msgnum> [msgnum ...]
Non-sysops may only read bulletins, and private mail sent by them or
to them.
   Examples: RH 327      - Read message 327 with routing headers.
             RH 55 66 77 - Read multiple messages with routing hdrs
See also: R>, R<, R@, READ, RM, RN
</code>
=====R=====
<code>
The R commands are used to read messages.
The variants available to non-sysops are as follows:
           R> <to>         Read messages TO callsign or category
           R< <from>       Read messages FROM callsign
           R@ <at>         Read messages AT a distribution
           R[ead] <n ...>  Read msg(s), hiding routing headers.
           RH <n ...>      Read message(s) showing routing headers
           RM              Read Mine (all messages addressed to you)
           RN              Read New (unread) mail addressed to you
Each of the above commands has its own help page.
See also: R>, R<, R@, READ, RH, RM, RN
</code>
=====R<=====
<code>
The R< (Read From) reads all messages sent by a specified callsign.
   Syntax: R< <callsign>
The argument is case-independent. Wildcards are accepted.  Non-sysops
may only read bulletins, and private mail addressed to or from
themselves.
   Examples: R< G8PZT  - Read messages sent by G8PZT
             R< VK*    - Read messages sent by Australians
See also: R>, R@, READ, RH, RM, RN
</code>
=====R>=====
<code>
The R> (Read To) reads all messages with a specified callsign or
bulletin topic in the TO field.
   Syntax: R> <callsign | topic>
The argument is case-independent. Wildcards are accepted.  Non-sysops
may only use this command read bulletins, and private mail they sent.
   Examples: R> G8PZT  - Read messages from you to G8PZT
             R> TECH*  - read bulletins to topic TECH, TECHNI etc.
See also: R<, R@, READ, RH, RM, RN
</code>
=====R@=====
<code>
The R@ (Read At) command reads bulletins targetted AT a specified
distribution area.
   Syntax: R@ <distribution>
The argument is case-independent. Wildcards are accepted.
   Examples: R@ GBR  - Read messages with GBR distribution area
             R@ EU*  - Read messages with EU or EURO distribution
See also: R>, R<, READ, RH, RM, RN
</code>
=====RM=====
<code>
The RM (Read Mine) command reads all messages addressed to you,
regardless of whether on not you have read them before.
   Syntax: RM
(Use the RN (Read New) command to read only your unread mail).   
See also: LM, R>, R<, R@, READ, RH, RN
</code>
=====RN=====
<code>
The RN (Read New) command reads unread messages addressed to you.
   Syntax: RN
Use RM (Read Mine) to read ALL messages addressed to you.
See also: LN, R>, R<, R@, READ, RH, RM
</code>
=====SB=====
<code>
The SB (Send Bulletin) command is used to send a "bulletin", i.e. a
message which can be read by anyone.
   Syntax: SB <topic> [ @ <area> ]
If you omit the bit in the square brackets, the bulletin stays on
this mailbox, otherwise it is delivered to all other mailboxes within
the specified distribution area.
The <topic> field targets the bulletin at an intended audience, and
can consist of any word, up to 6 characters maximum, e.g. ALL IBM
HELP TCPIP etc. Please use a meaningful <topic> field if possible.
The <area> or "at" field should consist of a recognised area code.
Examples are: WMIDS - West midlands mailboxes
              FOURP - Mailboxes in the Fourpak area
              GBR   - All mailboxes in Great Britain
              EU    - All mailboxes in Europe (includes GBR)
              WWW   - All mailboxes in the world.
Please try to target your bulletin to the minimum area necessary.
   Examples: SB IBM @ WMIDS  - Bull about IBM to west mids mailboxes.
             SB HELP @ GBR   - Ask everyone in Great Britain for help.
See also: S, SEND, SP, SR
</code>
=====SEND=====
<code>
The SEND command, which can be abbreviated to "S", sends a personal
message to the sysop (SYstem OPerator) of this mailbox.
   Syntax: S[end]
You will be prompted to enter a subject, then the text of the message.
See also: SB, SP, SR
</code>
=====S=====
<code>
The S commands are used to send messages and bulletins.
The variants available to non-sysops are as follows:
   S[end]          Send a message to sysop.
   SB <topic>      Send bulletin to <topic>
   SP <call>       Send personal message to <call>
   SR [msgnum]     Send Reply to a message
Each of the above commands has its own help page.
See also: SB, SEND, SP, SR
</code>
=====SP=====
<code>
The SP (Send Personal) command  is used to send a personal message,
i.e. one which is targeted at a single individual.
   Syntax: SP <to> [ @ <at> ]
The <to> field must contain the recipient's callsign. The <at> field
is semi-optional, and consists of the callsign of the recipient's
"home BBS", plus other routing information where necessary. 
This mailbox contains a database of known active mail users, called
the "White Pages", or WP for short. If the recipient's callsign is
known to WP there is no need to enter the <at> field, as the mailbox
will automatically supply it.
If you enter an incomplete address, the WP attempts to extend it, but
if you enter a full address, WP assumes you know best, and does not
intervene. Therefore if you do supply a complete address, make sure
it is EXACTLY right, or your mail may get lost.
   Examples: SP G8PZT   <-- No address supplied. WP will supply it
                             if recipient is known.
             SP G8PZT @ GB7PZT  <-- Partial address supplied. WP will
                                     attempt to extend it.
             SP G8PZT @ GB7PZT.#24.GBR.EU   <-- Full address supplied.
                                                WP won't intervene.
If you're sending a message to another user of this mailbox, you
needn't enter the <at> field.
If you're sending a message to a user of another mailbox, you only
need to supply an address if the WP doesn't know the recipient.
If in doubt, use the "I <callsign>" command to check if the recipient
is in the WP database.
See also: I, S, SB, SEND, SR, WPAGES
</code>
=====SR=====
<code>
The SR (Send Reply) command is used to reply to a message that you
have just read.
   Syntax: SR [msgnum]
If you don't specify [msgnum] it is best to use this immediately after
reading a message, because some commands cause the mailbox to "forget"
the last message you read.
The mailbox automatically fills in the address, and prepends "RE:" to
the original subject. The reply will always be a private message, even
if you're replying to a bulletin.
You will then be prompted to enter the message text in the usual way.
It is advisable to use the "SR" command in preference to "SP" wherever
possible, to reduce addressing errors.
   Examples: SR     - Send reply to message you just read
             SR 123 - Send a reply to message number 123
See also: SB, SEND, SP
</code>
=====U=====
<code>
The U (Unread) command "un-reads" a message (marks it unread).
   Syntax: U[nread] <msg>
Users may only "unread" their own mail.
   Example: UN 357 - Unread message 357
See also: R, RM, RN
</code>
=====WPAGES=====
<code>
The WP (White Pages) database on this mailbox is part of a world wide
distributed database, which holds details of all recently active
Packet users, and is primarily used by mailboxes to make mail routing
decisions. The data is also available to users via a number of search
commands.
The data is collected from two main sources:
   1) from the details a user enters when they register on a mailbox.
   2) from the headers of mail in transit.
Most mailboxes with WP capability share their data by means of
regular "WP Update" messages.  These were supposed to be sent to
"regional" servers, which would collate the data and send it via
regional and national servers to a world server. This system has all
fallen apart over time.
It is important that you nominate only ONE BBS as your "home BBS", and
only send messages from that BBS, otherwise WP will assume you've
moved BBS and will get confused.  Your mail WILL DEFINITELY be lost!
If a user has not sent a message, and has not re-registered on a BBS
within a certain period, his details are purged from the WP database. 
The period is commonly 90 days, but can be as low as 30 days. 
There are many packet users who NEVER log into a mailbox, and who are
therefore "invisible" to WP.
The local database can be searched using the I, I@, IC, IH, IN, IQ
and IZ commands,for which help is available.
See also: I, I@, IC, IH, IN, IQ, IZ
</code>