User Tools

Site Tools


radios:ft-991a

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
radios:ft-991a [2024/02/15 18:01] m0lteradios:ft-991a [2024/02/15 18:04] – [TNC cable] m0lte
Line 15: Line 15:
 | **Pin** | **Use**  | **NinoTNC / Kantronics pin** | | **Pin** | **Use**  | **NinoTNC / Kantronics pin** |
 | 1       | TX audio | 1                | 1       | TX audio | 1               
 +| 2       | Ground   | 6               |
 | 3       | PTT      | 3               | | 3       | PTT      | 3               |
 | 5       | RX audio | 5               | | 5       | RX audio | 5               |
-| 2       | GND      | 6               |+
  
 A suitable cable can be made from a PS/2 extension lead, scrap PS/2 mouse or keyboard. Sometimes with the mouse/keyboard option, not all of the required pins are populated, so may not be suitable. Identify the pins with a multimeter (a croc clip lead is useful here.) Solder a DB9 plug on to the other end as above. A suitable cable can be made from a PS/2 extension lead, scrap PS/2 mouse or keyboard. Sometimes with the mouse/keyboard option, not all of the required pins are populated, so may not be suitable. Identify the pins with a multimeter (a croc clip lead is useful here.) Solder a DB9 plug on to the other end as above.
radios/ft-991a.txt · Last modified: 2024/03/26 23:04 by mm0rfn