radios:tait_tm8100
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | Last revisionBoth sides next revision | ||
| radios:tait_tm8100 [2024/04/18 20:06] – Add mic cleaning tips alexswl | radios:tait_tm8100 [2024/04/18 20:10] – alexswl | ||
|---|---|---|---|
| Line 178: | Line 178: | ||
| * The grille on the front of the radio is 99% for show with only a small hole for the mic itself. You can scrub this gently using a toothbrush and some kind of spray, though make sure you did remove the mic and separate away the PCB in the previous step. An anti-bac probably won't go deep enough. I used 99.9% IPA successfully but this is not advised as it can be harsh, but is very effective at removing grime. | * The grille on the front of the radio is 99% for show with only a small hole for the mic itself. You can scrub this gently using a toothbrush and some kind of spray, though make sure you did remove the mic and separate away the PCB in the previous step. An anti-bac probably won't go deep enough. I used 99.9% IPA successfully but this is not advised as it can be harsh, but is very effective at removing grime. | ||
| - | * Reattach the rubber seal, place back in the spring and PTT plastic button, reinstall the PCB, and screw the mic together. | + | * Reattach the rubber seal, place back in the spring and PTT plastic button, reinstall the PCB (there are wire routing channels for the mic wires), and screw the mic together. |
| ====== Packet Configuration ====== | ====== Packet Configuration ====== | ||
radios/tait_tm8100.txt · Last modified: 2024/04/22 17:52 by alexswl