Differences

This shows you the differences between two versions of the page.

--- rpi-watchdog [2024/01/19 19:34] – gm5aug
+++ rpi-watchdog [2024/01/19 23:48] (current) – m0lte
@@ Line 6: / Line 6: @@
 <code>
-sudo -i\\
+sudo -i
-echo 'dtparam=watchdog=on' >> /boot/config.txt\\
+echo 'dtparam=watchdog=on' >> /boot/config.txt
-reboot\\
+yes | apt install watchdog
+echo 'watchdog-device = /dev/watchdog' >> /etc/watchdog.conf
+echo 'watchdog-timeout = 15' >> /etc/watchdog.conf
+echo 'max-load-1 = 24' >> /etc/watchdog.conf
+systemctl enable watchdog
+reboot
 </code>
-Then copy/paste these commands into your terminal, one at a time:
+To include your WiFi interface in the scope of the watchdog check:
 <code>
-sudo -i\\
+sudo su
-yes | apt install watchdog\\
+echo 'interface = wlan0' >> /etc/watchdog.conf
-echo 'watchdog-device = /dev/watchdog' >> /etc/watchdog.conf\\
+reboot
-echo 'watchdog-timeout = 15' >> /etc/watchdog.conf\\
-echo 'max-load-1 = 24' >> /etc/watchdog.conf\\
-systemctl enable watchdog\\
-systemctl start watchdog\\
-systemctl status watchdog\\
 </code>
  --- //[[[email protected]|Michael GM5AUG]] 2024/01/19 19:28//