Online Amateur Radio Community Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
Where to buy

https://www.amazon.co.uk/dp/B07MB8Y8SF

Additional board manager: http://drazzy.com/package_drazzy.com_index.json

https://github.com/SpenceKonde/ATTinyCore?tab=readme-ov-file

Random tutorials that got me there

https://startingelectronics.org/tutorials/arduino/digispark/digispark-windows-setup/

https://www.instructables.com/How-to-Setup-DigiSprak-Attiny85-Board/


Sample sketch with LED connected to pin 1 and GND
<code>
void setup() {                
  // Initialize the digital pin as an output
  pinMode(0, OUTPUT);      // LED on Model B
  Serial.begin(9600);

  // if analog input pin 0 is unconnected, random analog
  // noise will cause the call to randomSeed() to generate
  // different seed numbers each time the sketch runs.
  // randomSeed() will then shuffle the random function.
  randomSeed(analogRead(0));
}

void loop() {
  digitalWrite(0, HIGH);   // Turn the LED on
  // delay(random(1500));             // Wait for a second
  delay(2000);
  digitalWrite(0, LOW);    // Turn the LED off
  //delay(random(500));             // Wait for a second
  delay(1000);
}
</code>

OLED - https://github.com/datacute/Tiny4kOLED

Sample code - https://github.com/datacute/Tiny4kOLED?tab=readme-ov-file#example-usage

{{:oled_lib.png?400 |}}

{{ :oled_result_1.jpg?400 |}}

Building programmer
https://dev.to/dariocasciato/attiny85-programming-your-complete-guide-with-arduino-and-platformio-37do
https://www.instructables.com/Compact-Attiny-138584-Programmer-Using-Arduino-Nan/