Differences

This shows you the differences between two versions of the page.

--- ftm300gpsmod [2022/04/13 10:45] – [Programming the GPS Module in U-Center] m0smu
+++ ftm300gpsmod [2022/04/13 10:49] (current) – ei5iyb
@@ Line 1: / Line 1: @@
 ====== How to connect external GPS module to Yaesu FTM-300 ======
+==== TL;DR ====
+Yaesu FTM-300 requires higher logic levels than BN-220 can provide. MAX3232 is used to translate lower TTL logic levels to higher RS232 logic levels - [[https://www.sparkfun.com/tutorials/215|Quick tutorial here.]] GPS module will require to be set to GPS constellation only in u-center. Radio needs to be set to external GPS device. Transmit from the radio Data Tx to GPS receive Data Rx does not need to be connected. Baud rate is set to 9600.
 ====== List of parts ======
 ==== Production ====
@@ Line 54: / Line 55: @@
   - {{::screenshot_2022-04-13_114010.png?direct&200|}}
   - Ask Simon - M0SMU for help in Discord if you get stuck
-==== TL;DR ====
-Yaesu FTM-300 requires higher logic levels than BN-220 can provide. MAX3232 is used to translate lower TTL logic levels to higher RS232 logic levels - [[https://www.sparkfun.com/tutorials/215|Quick tutorial here.]] GPS module will require to be set to GPS constellation only in u-center. Radio needs to be set to external GPS device. Transmit from the radio Data Tx to GPS receive Data Rx does not need to be connected. Baud rate is set to 9600.