Differences

This shows you the differences between two versions of the page.

--- openwebrx [2023/07/16 17:39] – m0lte
+++ openwebrx [2023/07/16 17:41] (current) – m0lte
@@ Line 5: / Line 5: @@
 ===== Raspberry Pi + SDR Play Setup Walkthrough =====
-assumes some Linux terminal experience.
+This guide does assume some Linux terminal experience.
+There are multiple variants of OpenWebRX out there - this guide is for the basic "official" version. You can easily switch later after you've got this basic version up and running.
 **Please read this entire page first to ensure you pick the most appropriate method for you.**
@@ Line 14: / Line 16: @@
   * SDR Play RSP1
-==== Steps followed - Docker version ====
+==== Docker version ====
 NB there is an issue when using Docker with the initialisation of the RSP1 when used with Docker which requires 'sudo docker compose restart' after the host system boots. [[https://github.com/jketterl/openwebrx/wiki/SDRPlay-device-notes#using-sdrplay-devices-in-docker-containers|More info]]
@@ Line 62: / Line 64: @@
 If this is a non-starter for you, you might like to go for the bare OS approach instead, removing Docker from the equation, which follows:
-==== Steps followed - bare OS version ====
+==== Bare OS version ====
 Download and install 64 bit Raspberry Pi OS Lite. Then: