Differences

This shows you the differences between two versions of the page.

--- packet:xrouter:telnet-interfaces [2024/02/17 06:42] – g8pzt
+++ packet:xrouter:telnet-interfaces [2025/02/22 02:36] (current) – g8pzt
@@ Line 1: / Line 1: @@
 ====== XRouter Tour - Telnet Interfaces ======
-Up to 3 "telnet" interfaces can be configured on XRouter. The general purpose one defaults to TCP port 23. There's a sysop-only one, usually on TCP port 513, and one for machine-to-machine interactions, the so-called "Telnet Proxy".
+[[packet:xrouter:tour|Back to Tour Index Page]]
+Up to 3 types of "telnet" interface can be configured on XRouter.
+The general purpose one defaults to TCP port 23. There's a sysop-only one, usually on TCP port 513, and one for machine-to-machine interactions, the so-called "Telnet Proxy". These are described below:
+==== Standard Telnet ====
 Here's a typical login to port 23 from a Linux terminal:
@@ Line 21: / Line 27: @@
 {{telnetpass.png}}
+==== Remote Login (RLOGIN) ====
 RLOGINPORT, if enabled, is intended for sysops-only. You can connect directly as a sysop, using your "sysop" password instead of your "user" one...
@@ Line 26: / Line 34: @@
 {{telnet513.png}}
-(to be continued)..
+==== Telnet Proxy ====
+The telnet proxy is intended mainly for machine-to-machine operations, e.g. to allow a TCP application to control the node or make outgoing NetRom/AX25 connections. The difference between this and "normal" telnet is that, after the password challenge is completed, the session switches to pure binary mode.
+{{telproxy.png}}
+The telnet proxy has been used by a several applications, including a BBS and a node crawler.
+(The text sent after login is configurable).
+On the next page we'll look at a typical use of the telnet proxy.
+**Next:** [[packet:xrouter:qttermtcp | BPQ's QTTermTCP With Xrouter]]
+[[packet:xrouter:tour|Back to Tour Index Page]]