Differences

This shows you the differences between two versions of the page.

--- packet:bpq [2025/04/12 09:39] – [BPQ Configuration] 2e0hkd
+++ packet:bpq [2025/04/13 11:43] (current) – m0lte
@@ Line 33: / Line 33: @@
 <code>
-M0LTEMapInfo=<RF|PrivateNet|Internet|Other>,<DIAL+freq|freq>,<baudrate>,<bitrate>,<Access|Backbone|Mixed|Other>
+M0LTEMapInfo=<RF|PrivateNet|Internet|Other>,<DIAL+modem centre freq|freq_mhz>,<modulation>,<baudrate>,<bitrate>,<Access|Backbone|Mixed|Other>
 </code>
-The DIAL+freq format is used if you are setting the frequency with rigcontrol.
+The DIAL+freq format is used if you are setting the frequency with rigcontrol. 40m slot one would be DIAL+850.
 Example port configuration:
@@ Line 44: / Line 44: @@
   PORTNUM=1
   ID=432.625 9600 GFSK IL2P+CRC
-  M0LTEMapInfo=RF,9600,GFSK,9600,9600,Mixed
+  M0LTEMapInfo=RF,432.625,GFSK,9600,9600,Mixed
   ..... other port config ...
@@ Line 256: / Line 256: @@
 See [[packet:linbpq_monitoring|Monitoring LinBPQ through SNMP]]
+===== BPQ Web Monitor =====
+Watch the packet racket in your web browser!
+See [[packet:bpqmonweb|Setting up Tom 2E0JJI's bpqmonweb project]]
 ===== Credentials =====