Differences

This shows you the differences between two versions of the page.

--- packet:bpq [2025/04/12 16:38] – [Showing up on the Maps] 2e0hkd
+++ packet:bpq [2025/10/31 21:31] (current) – [BPQ Web Monitor] g7taj
@@ Line 33: / Line 33: @@
 <code>
-M0LTEMapInfo=<RF|PrivateNet|Internet|Other>,<DIAL+freq_mhz|freq_mhz>,<modulation>,<baudrate>,<bitrate>,<Access|Backbone|Mixed|Other>
+M0LTEMapInfo=<RF|PrivateNet|Internet|Other>,<DIAL+modem centre freq|freq_mhz>,<modulation>,<baudrate>,<bitrate>,<Access|Backbone|Mixed|Other>
 </code>
-The DIAL+freq format is used if you are setting the frequency with rigcontrol.
+The DIAL+freq format is used if you are setting the frequency with rigcontrol. 40m slot one would be DIAL+850.
 Example port configuration:
@@ Line 257: / Line 257: @@
 See [[packet:linbpq_monitoring|Monitoring LinBPQ through SNMP]]
+===== BPQ Web Monitor =====
+Watch the packet racket in your web browser!
+See [[packet:bpqmonweb|Setting up Tom 2E0JJI's bpqmonweb project]]
+See TARPN-MON [[tarpn-mon|TARPN-MON]]
 ===== Credentials =====