Differences

This shows you the differences between two versions of the page.

--- packet:bpq [2025/04/12 20:55] – m0mzf
+++ packet:bpq [2026/01/08 00:16] (current) – [PacMon] g5rkt
@@ Line 33: / Line 33: @@
 <code>
-M0LTEMapInfo=<RF|PrivateNet|Internet|Other>,<DIAL+freq_mhz|freq_mhz>,<modulation>,<baudrate>,<bitrate>,<Access|Backbone|Mixed|Other>
+M0LTEMapInfo=<RF|PrivateNet|Internet|Other>,<DIAL+modem centre freq|freq_mhz>,<modulation>,<baudrate>,<bitrate>,<Access|Backbone|Mixed|Other>
 </code>
-The DIAL+freq format is used if you are setting the frequency with rigcontrol.
+The DIAL+freq format is used if you are setting the frequency with rigcontrol. 40m slot one would be DIAL+850.
 Example port configuration:
@@ Line 257: / Line 257: @@
 See [[packet:linbpq_monitoring|Monitoring LinBPQ through SNMP]]
-===== Tom 2E0JJI's bpqmonweb =====
+===== BPQ Web Monitor =====
-Tom has created a superb web application to monitor a BPQ or Xrouter node.
+Watch the packet racket in your web browser!
+See [[packet:bpqmonweb|Setting up Tom 2E0JJI's bpqmonweb project]]
+See TARPN-MON [[tarpn-mon|TARPN-MON]]
+===== PacMon =====
+The best way to figure out what's going on with your links is by using [[https://pacmon.m0ahn.compute.oarc.uk/|PacMon]] to send your frame metadata to OARC for your digesting pleasure! Just add the following to your global configuration:
+<code> ENABLEOARCAPI=1 </code>
 ===== Credentials =====