Differences

This shows you the differences between two versions of the page.

--- packet:bpq [2025/04/12 21:10] – [Tom 2E0JJI's bpqmonweb] m0mzf
+++ packet:bpq [2026/08/07 21:02] (current) – Mort upgrade: multi-line '' block -> <code> block 0.0.0.0
@@ Line 33: / Line 33: @@
 <code>
-M0LTEMapInfo=<RF|PrivateNet|Internet|Other>,<DIAL+freq_mhz|freq_mhz>,<modulation>,<baudrate>,<bitrate>,<Access|Backbone|Mixed|Other>
+M0LTEMapInfo=<RF|PrivateNet|Internet|Other>,<DIAL+modem centre freq|freq_mhz>,<modulation>,<baudrate>,<bitrate>,<Access|Backbone|Mixed|Other>
 </code>
-The DIAL+freq format is used if you are setting the frequency with rigcontrol.
+The DIAL+freq format is used if you are setting the frequency with rigcontrol. 40m slot one would be DIAL+850.
 Example port configuration:
@@ Line 218: / Line 218: @@
 Arguments:
-''
+<code>
 -G7TAJ : Steve %%*%%%%*%%%%*%% Joined Chat, Topic General
-''
+</code>
@@ Line 257: / Line 257: @@
 See [[packet:linbpq_monitoring|Monitoring LinBPQ through SNMP]]
+===== BPQ Web Monitor =====
+Watch the packet racket in your web browser!
+See [[packet:bpqmonweb|Setting up Tom 2E0JJI's bpqmonweb project]]
+See TARPN-MON [[tarpn-mon|TARPN-MON]]
+===== PacMon =====
+The best way to figure out what's going on with your links is by using [[https://pacmon.m0ahn.compute.oarc.uk/|PacMon]] to send your frame metadata to OARC for your digesting pleasure! Just add the following to your global configuration:
+<code> ENABLEOARCAPI=1 </code>
 ===== Credentials =====
@@ Line 267: / Line 280: @@
 Requires ''libjansson-dev'', ''libpaho-mqtt-dev''
+===== PicoBPQ =====
+Documentation for the version of PicoBPQ with WhatsPac interface is at
+https://www.cantab.net/users/john.wiseman/Documents/picoBPQ.html and
+https://www.cantab.net/users/john.wiseman/Documents/picoBPQWPS.html.
+The source is at https://github.com/g8bpq/picoBPQ.git