Differences

This shows you the differences between two versions of the page.

--- packet:building_a_node [2023/04/03 21:55] – [Options] m0lte
+++ packet:building_a_node [2023/04/15 21:43] (current) – [Options] m0lte
@@ Line 23: / Line 23: @@
   - [[packet:bpq|Install BPQ32]] on a Raspberry Pi or spare old Windows or Linux computer
-  - [[packet:linux_kernel|Configure the AX.25 and NET/ROM support]] built into your Linux computer - including the Raspberry Pi
+  - [[packet:kernel-ax25-pi|Configure the AX.25 and NET/ROM support]] built into your Linux computer - including the Raspberry Pi
   - [[packet:xrpi|Install XRPi]] - an AX.25 / NET/ROM / TCP/IP router for Linux, which has just become known to this group and looks interesting
   - [[packet:hardware_tncs|Use a traditional standalone TNC]] - unlike a KISS TNC, a standalone TNC can be a complete, if minimal, node - just add a radio.
@@ Line 32: / Line 32: @@
 You'll also need one or more radios, and well-sited antennas. For radios, take a look at this [[packet:transceivers|member-contributed list of experiences with particular radios]].
+To connect your TNC to your radio, [[packet:cables|you'll need a cable]].