Differences

This shows you the differences between two versions of the page.

--- packet:packet_network_monitoring_project [2025/11/05 14:24] – [How To Enable Telemetry on Your Node] g8pzt
+++ packet:packet_network_monitoring_project [2025/11/05 15:56] (current) – [How To Enable Telemetry on Your Node] g8pzt
@@ Line 19: / Line 19: @@
 Dynamic Network Map: [[https://node-api.packet.oarc.uk/network-map.html]]
+//There are more API's being developed - **watch this space!**//
 ==== Viewing Packet Traces ====
@@ Line 43: / Line 44: @@
 ==== How To Enable Telemetry on Your Node ====
-  * **If you run XRouter:** XRouter has been automatically sending telemetry since v504j, allowing the system to be developed and refined. But for best results, please update to version 504m. If you wish to DISABLE telemetry, please add the following directive to XROUTER.CFG: "NETMON=0.0.0.0:0".
+  * **If you run [[packet:xrouter:about-xrouter|XRouter]]:** XRouter has been automatically sending telemetry since v504j, allowing the system to be developed and refined. But for best results, please update to version 504m. If you wish to DISABLE telemetry, please add the following directive to XROUTER.CFG: "NETMON=0.0.0.0:0".
-  * **If you run BPQ:** Firstly, you need to be running version 6.0.25.9. Then, because the client is disabled by default, you need to add the following directive to your bpq configuration file: "ENABLEOARCAPI=1".
+  * **If you run [[packet:bpq|BPQ]]:** Firstly, you need to be running version 6.0.25.9. Then, because the client is disabled by default, you need to add the following directive to your bpq configuration file: "ENABLEOARCAPI=1".
 ==== How To Confirm That Your Node Is Sending Telemetry ====