Differences

This shows you the differences between two versions of the page.

--- packet:bpq_nodes_on_aprs [2024/09/22 13:23] – m0lte
+++ packet:bpq_nodes_on_aprs [2024/09/22 18:33] (current) – [Receive-only setup] m0lte
@@ Line 36: / Line 36: @@
 <code>
+IDINTERVAL=15 ; (minutes) or whatever value you wish to use
 IDMSG:
 !5505.10N/00136.44W#GB7CNR OARC PRN (https://packet.oarc.uk/). AX.25 1200bd @ 144.9375
@@ Line 91: / Line 92: @@
 </code>
+==== Receive-only setup ====
+Do something like this to achieve a receive-only igate setup (e.g. if you are listening for telemetry beacons from remotely located kit, and you want to gate it to APRS-IS / aprs.fi)
+This will also put a BBS pin in the https://aprs.fi map for your own node, via the internet. Like [[https://aprs.fi/#!z=14&call=a%2FGB7RDG&timerange=3600&tail=0|this]].
+Put this new block outside the PORTS section of the config file, i.e. at the root level.
+<code>
+APRSDIGI
+  LAT=5026.83N    ; calculating these is non-obvious, use this website to help
+  LON=00101.62W   ; https://om1amj.sk/index.php/conversion-of-gps-coordinates-to-aprs-format
+  StatusMsg=Put a message here, maybe a link to your node page at https://ukpacketradio.network
+  Symbol=B
+  Symset=/        ; B/ is BBS icon
+  APRSPath 1=     ; I have three ports, 1-3, may as well listen on all of them for APRS
+  APRSPath 2=     ; These are all receive-only ports for APRS.
+  APRSPath 3=
+  ISHost=england.aprs2.net
+  ISPort=14580
+  ISPasscode=nnnnn     ; calculate this value here: https://apps.magicbug.co.uk/passcode/index.php/passcode
+  OBJECT PATH=IS PORT=1,IS INTERVAL=30 TEXT=>Any text you want goes here
+  BeaconInterval=30    ; minutes
+***
+</code>
+Substitute appropriate values for yourself.
+Don't forget the *** at the end, it's crucial