Online Amateur Radio Community Wiki

User Tools

Site Tools

Trace: • vhfwxsatellitetips-antenna • oarc-sota-day-power • oarc-sota-day-2023
packet:network-monitoring-project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
packet:network-monitoring-project [2025/11/02 11:23] – [What We Need From You] m0ltepacket:network-monitoring-project [2025/11/09 21:53] (current) – [Configuration: Xrouter (G8PZT)] m0lte
Line 118: Line 118:
 **Status:** default-on **Status:** default-on
  
-**(Paula’s section will go here.)** +See [[packet_network_monitoring_project|Paula's write-up]]
- +
-Suggested content for Paula: +
- +
-  * Which Xrouter versions/builds have this telemetry already baked in +
-  * What, if anything, the sysop needs to set (host, port, interval) +
-  * How to confirm from Xrouter logs that it has sent an update +
-  * How to confirm on **https://node-api.packet.oarc.uk/** that the node is listed +
-  * Recommended reporting interval / not being too chatty +
-  * Notes about also talking to the *mapping API* (this monitoring service is separate but complementary) +
- +
-Example structure Paula could use: +
- +
-  *Prerequisites* +
-  *Configuration block / commands* +
-  *Restart / reload instructions* +
-  *How to verify on the web front end (including the Network Map)* +
-  *How to back off reporting if bandwidth is tight* +
- +
-(Replace this whole subsection with Paula’s real notes.)+
  
 ---- ----
Line 144: Line 125:
 **Status:** default-off — you must enable it. **Status:** default-off — you must enable it.
  
-**(John’s section will go here.)** +Obtain latest testing binary, or build from github source 
- +in your bpq32.cfg:
-Suggested content for John: +
- +
-  * The minimal parameter(s) to add to BPQ to start sending telemetry +
-  * How to verify BPQ has actually sent a packet to the monitoring service +
-  * Notes for sysops behind NAT/firewalls (allow outgoing UDP to the service) +
-  * Recommended reporting interval +
-  * A quick “disable” / “rollback” line in case someone wants to stop sending +
-  * How to check on **https://node-api.packet.oarc.uk/** that it worked +
-  * How to confirm the node is now visible on **Network Map** (if link data is present) +
- +
-Example structure John could use: +
- +
-  *Add this to BPQ config:* +
-  *Restart BPQ:* +
-  *Check the front end:* +
-  *Check Network Map:* +
-  *If you don’t see it, check firewall:*+
  
-(Replace this whole subsection with John’s real notes.)+<code> 
 +ENABLEOARCAPI=1 
 +</code>
  
 ---- ----
packet/network-monitoring-project.1762082604.txt.gz · Last modified: by m0lte