Differences

This shows you the differences between two versions of the page.

--- packet:new-packet_radio_3_0 [2026/04/16 07:01] – m0ahn
+++ packet:new-packet_radio_3_0 [2026/04/16 07:25] (current) – [Dec 2025 Firmware Commands] m0ahn
@@ Line 1: / Line 1: @@
 ====== New Packet Radio 3.0 ======
-This page covers supporting information for users of New Packet Radio (NPR) 3.0 - the latest revision of the original F4HDK-invented New Packet Radio modem first released in 2019.
+This page covers supporting information for users of New Packet Radio (NPR) 3.0 - the latest revision of the original F4HDK-invented New Packet Radio modem developed and released by Steffen D05DSH and Localino in 2025/26
 ===== NPR 3.0: Quick Start =====
@@ Line 7: / Line 7: @@
 By default, NPR 3.0 firmware is configured in Client mode, To establish a link, a Client and Master is required. Quick start setup for both is covered below.
-All configuration is via the Ethernet port using **telnet**. Default configuration is **192.168.0.0/24**, the NPR IP is **192.168.0.253** and DHCP range starts at **192.168.0.65**
+All configuration is via the Ethernet port using **telnet**, or, via UART. Default configuration is **192.168.0.0/24**, the NPR IP is **192.168.0.253** and DHCP range starts at **192.168.0.65**
 ==== Initial Setup ====
@@ Line 70: / Line 70: @@
     * pynpr fwflash -s auto path/to/nfw.nfw
-==== Dec 2025 Firmware Commands ====
+==== Dec 2025 Firmware ====
 NPR Commands
@@ Line 78: / Line 78: @@
 localino-npr_fw25121101 default configures 70cm band.
+Download: {{:packet:localino-npr_fw25121101_hw240719.nfw.zip|fw25121101}} and UNZIP before upgrading
 Changes: