packet:new-packet_radio_3_0
This is an old revision of the document!
Table of Contents
New Packet Radio 3.0
This page covers supporting information for users of New Packet Radio (NPR) 3.0 - the latest revision of the original F4HDK-invented New Packet Radio modem first released in 2019.
Background and Introduction
Configuration
Pinouts
Connector 1
| Pinout | Description |
|---|---|
| RX | RS232 RX, 921600 Baud |
| TX | RS232 TX, 921600 Baud |
| 12V0 | 12V Out |
| 5V0 | 5V Out |
| 3V3 | 3.3V Out |
| - | Not Used |
| GND | Ground |
| PE1 | |
| GND | Ground |
| PE0 | |
| PB7 | |
| PD7 |
Connector 2
| Pinout | Description |
|---|---|
| 3V3 | 3.3V Out |
| CLK | |
| DIO | |
| GND | Ground |
| RST |
Upgrading Firmware
Flashing the firmware in NPR 3.0 requires:
- A Windows PC
- Installation of the xxx drivers
- Either a) a Micro-USB cable, or b) a UART interface connected to the RX, TX and GND pins
- The new firmware (with .nfw extension)
- The pynpr.exe program
packet/new-packet_radio_3_0.1762730434.txt.gz · Last modified: by m0ahn