Differences

This shows you the differences between two versions of the page.

--- packet:tr_usdx [2024/11/03 19:07] – created m7taw
+++ packet:tr_usdx [2024/11/03 19:24] (current) – m7taw
@@ Line 6: / Line 6: @@
 Raspberry Pi --> [[https://digirig.net/| Digirig]] --> [[https://digirig.net/product/usdx-cable-for-digirig-mobile | uSDX Digirig audio cable]] --> (tr)uSDX.
+=== Raspberry Pi setup ===
+When Digirig is plugged into the raspberry pi via USB, the input and output devices required for audio will show as "USB Audio Device". Example below for QtSoundModem.
+{{:packet:qtsm_digirig_linux.png?400|}}
+Your PTT Port will be the ttyUSBx currently being occupied by the Digirig device. You can run ''ls -l /dev/serial/by-id'' in a terminal to find out - the device will be named "usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller" or something similar.
+=== (tr)uSDX setup ===
+To connect the radio, simply connect the audio cable into the audio port of the Digirig, and then connect the Green jack to the Audio port and the Red jack to the PTT/Key port as below.
+{{:packet:trusdx_digirig.png?400|}}
 {{tag>radio packet hf}}