packet:tr_usdx
This is an old revision of the document!
Table of Contents
Packet on (tr)uSDX
Anthony M7TAW has successfully got this running on 40m HF Packet. Please note as this transceiver is QRP, it is not the optimal setup, but if you pray to the sun gods it can work.
M7TAW current setup
Raspberry Pi –> Digirig –> uSDX Digirig audio cable –> (tr)uSDX.
Raspberry Pi setup
When Digirig is plugged into the raspberry pi via USB, the input and output devices required for audio will show as “USB Audio Device”. Example below for QtSoundModem.
(tr)uSDX setup
Once the digirig is attached to the RPi, simply connect the audio cable into the audio port of the Digirig, and then connect the Green jack to the Audio port and the Red jack to the PTT/Key port as below.
packet/tr_usdx.1730661572.txt.gz · Last modified: 2024/11/03 19:19 by m7taw