Differences

This shows you the differences between two versions of the page.

--- waoarc25:software-guide-tapr [2025/07/27 17:48] – gi3jmc
+++ waoarc25:software-guide-tapr [2025/07/27 17:53] (current) – [WSPR Software Configuration] gi3jmc
@@ Line 61: / Line 61: @@
 **5. **The transmitter should become active shortly after the Pi restarts (it waits for the next transmission cycle).  If you have added WiFi details, check that the Pi can be accessed at [[http://tapr/]] for any future adjustments you wish to make.
+  * If your pi is not accessible when connected to Ethernet, check the power and ethernet cables are inserted properly, and that the SD card is fully in place.  In a Pi 3 & 4, the SD card is held in place by friction, with the Pi 2, there is a push eject system.
+  * If your Pi is not accessible after disconnecting the ethernet cable, reconnect it, visit the configuration page in your browser and check/re-enter your WiFi details
 ----