ei5iybpastebin3
This is an old revision of the document!
Table of Contents
How to connect external GPS module to Yaesu FTM-300
List of parts
Production
- 2.5mm TRR jack cable or adapter from 3.5 mm TRR cable
- USB cable to power the system
- MAX3232 chip
- GPS module Beitian BN-220
- Heat Shrink
Development and testing
- Strip board
- Header pins
- MAX3232 chip
- Dupont connectors
- Heat shrink
- USB Cable or some other way to power the system
- RS232 to UBS adapter
- u-blox u-center v22.02 - download link
- Yaesu FTM-300 GPS connector pinout
Method
TL;DR
Yaesu FTM-300 requires logic higher logic levels than BN-220 can provide. MAX3232 is used to translate TTL logic levels to RS232 logic levels - Quick tutorial here. GPS module will require to be set to GPS constellation only in u-center. Radio needs to be set to external GPS device. Transmit from the radio Data Tx to GPS receive Data Rx does not need to be connected.
ei5iybpastebin3.1649799826.txt.gz · Last modified: 2022/04/12 21:43 by ei5iyb