Differences

This shows you the differences between two versions of the page.

--- morse:morse [2026/04/09 23:26] – [Websites] m5lgm
+++ morse:morse [2026/08/07 20:58] (current) – Mort upgrade: tighten emphasis markers so they parse again 0.0.0.0
@@ Line 83: / Line 83: @@
 | Morserino-32 | Self contained battery powered keyer, CW decoder and practice aid. Has LORA and WiFi capability | [[https://www.morserino.info/ | Morserino-32]] | Great for head copy and keying practice anywhere. Let's you plug in a straight key or paddle. |
 | Funtronics K3NG Keyer | An open source Arduino based CW (Morse Code) keyer with a lot of features and flexibility | [[https://elekitsorparts.com/product/funtronics-k3ng-keyer-fk-10-99-winkey-emulation | K3NG Keyer ]] | |
-| K1EL WinKeyer | WinKeyer is a low-cost full featured external Morse keyer capable of being fully controlled via a USB interface | [[https://hamcrafters2.com/| K1EL WinKeyer ]] |   //Needs new UK Vendor // - Looks like Kanga Products are a UK Vendor    [[https://www.kanga-products.co.uk/k1el-keyer-ics | Kanga Products]] |
+| K1EL WinKeyer | WinKeyer is a low-cost full featured external Morse keyer capable of being fully controlled via a USB interface | [[https://hamcrafters2.com/| K1EL WinKeyer ]] |   //Needs new UK Vendor// - Looks like Kanga Products are a UK Vendor    [[https://www.kanga-products.co.uk/k1el-keyer-ics | Kanga Products]] |
 ===== Keys =====
@@ Line 153: / Line 153: @@
 It can be very short exchange just with signal report, or it can be a longer exchange.
-When replying to a station calling CQ you may want to call in slightly off frequency, like 20kHz using XIT.
+When replying to a station calling CQ you may want to call in slightly off frequency, like 20 Hz using XIT.
 The basic idea is a station calls CQ after sending QRL?  The reply station replies.
 The CQ station will give a signal report, may give their name, location and pass it back to you. (**If you miss things it doesn't matter**)
-The reply station will give a signal report, may give name, location and pass it to CQ station.
+The reply station will give a signal report, may give name, location and pass it to the CQ station.
 They can then carry on talking about setup or anything else with RIG, PWR, ANT, WX or say goodbye to each other.
@@ Line 212: / Line 212: @@
   *If you are Calling CQ, you are in control and you can control how much you want to talk and when to end the QSO.
-  *When replying to a station calling CQ, you may want to reply slightly off frequency 20kHz, 30kHz etc. using XIT on the radio. If multiple people reply on the exact frequency in morse code it can end up being one long dah.
+  *When replying to a station calling CQ, you may want to reply slightly off frequency 20 Hz, 30 Hz etc. using XIT on the radio. If multiple people reply on the exact frequency in morse code it can end up being one long dah.