packet:cables
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| packet:cables [2025/12/18 11:32] – ei5iyb | packet:cables [2025/12/20 21:05] (current) – m0lte | ||
|---|---|---|---|
| Line 11: | Line 11: | ||
| All you need to do then is work out (with a multimeter) which pin corresponds to each wire, and tack them to the pins on a 9 pin D shell plug as follows: | All you need to do then is work out (with a multimeter) which pin corresponds to each wire, and tack them to the pins on a 9 pin D shell plug as follows: | ||
| - | ^ Yaesu pin ^ TNC Connection | + | ^ Yaesu pin ^ TNC Connection |
| - | | 1 | Transmit audio | + | | 1 | Audio to be transmitted |
| | 2 | Ground | | 2 | Ground | ||
| | 3 | PTT | | 3 | PTT | ||
| - | | 4 | Receive audio (9600 baud) | 5 Send audio (option) | + | | 4 | Receive audio (9600 baud) | 5 Receive |
| - | | 5 | Receive audio (1200 baud) | 5 Send audio (option) | + | | 5 | Receive audio (1200 baud) | 5 Receive |
| | 6 | Squelch | | 6 | Squelch | ||
| - | Pick pin 4 if you'll be using 9600 baud, or pin 5 if you're using 1200 baud. You might be able to use pin 4 for 1200 baud as well. | + | Radio' |
| + | |||
| + | {{: | ||
| + | |||
| + | Note: this is the BACK / SOLDER side of the PLUG: | ||
| + | |||
| + | {{: | ||
| + | |||
| + | |||
| + | Pick pin 4 if you'll be using 9600 baud, or pin 5 if you're using 1200 baud. You should | ||
| This is verified to work with FT-450D and FT-1500m, and likely very many other Yaesu radios too. This also appears to be the same for the Icom IC-7000. | This is verified to work with FT-450D and FT-1500m, and likely very many other Yaesu radios too. This also appears to be the same for the Icom IC-7000. | ||
| Line 103: | Line 112: | ||
| {{: | {{: | ||
| + | ===== Icom 746 HF Packet ===== | ||
| + | This pinout works only for HF. Plugs are shows from the " | ||
| + | VHF PTT is triggered by ACC(2) socket. | ||
| + | |||
| + | This pinout is for ACC(1) socket. | ||
| + | |||
| + | {{: | ||
| + | |||
| + | |||
| + | ===== Icom IC9700 ===== | ||
| + | {{: | ||
packet/cables.1766057545.txt.gz · Last modified: by ei5iyb
