Differences

This shows you the differences between two versions of the page.

--- packet:network-monitoring-project [2025/11/09 21:34] – [Configuration: BPQ (G8BPQ)] m0lte
+++ packet:network-monitoring-project [2025/11/09 21:53] (current) – [Configuration: Xrouter (G8PZT)] m0lte
@@ Line 118: / Line 118: @@
 **Status:** default-on
-**(Paula’s section will go here.)**
+See [[packet_network_monitoring_project|Paula's write-up]]
-Suggested content for Paula:
-  * Which Xrouter versions/builds have this telemetry already baked in
-  * What, if anything, the sysop needs to set (host, port, interval)
-  * How to confirm from Xrouter logs that it has sent an update
-  * How to confirm on **https://node-api.packet.oarc.uk/** that the node is listed
-  * Recommended reporting interval / not being too chatty
-  * Notes about also talking to the *mapping API* (this monitoring service is separate but complementary)
-Example structure Paula could use:
-  *Prerequisites*
-  *Configuration block / commands*
-  *Restart / reload instructions*
-  *How to verify on the web front end (including the Network Map)*
-  *How to back off reporting if bandwidth is tight*
-(Replace this whole subsection with Paula’s real notes.)
 ----