Differences

This shows you the differences between two versions of the page.

--- packet:tr_usdx [2024/11/03 19:19] – m7taw
+++ packet:tr_usdx [2024/11/03 19:24] (current) – m7taw
@@ Line 13: / Line 13: @@
 {{:packet:qtsm_digirig_linux.png?400|}}
+Your PTT Port will be the ttyUSBx currently being occupied by the Digirig device. You can run ''ls -l /dev/serial/by-id'' in a terminal to find out - the device will be named "usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller" or something similar.
 === (tr)uSDX setup ===
-Once the digirig is attached to the RPi, simply connect the audio cable into the audio port of the Digirig, and then connect the Green jack to the Audio port and the Red jack to the PTT/Key port as below.
+To connect the radio, simply connect the audio cable into the audio port of the Digirig, and then connect the Green jack to the Audio port and the Red jack to the PTT/Key port as below.
 {{:packet:trusdx_digirig.png?400|}}
 {{tag>radio packet hf}}