User Tools

Site Tools


radios:dr-m06th

This is an old revision of the document!


Modifying an Alinco DR-M06TH 6m transciever for packet usage

Finding an affordable single-band FM radio for 6m is a challenge, occasionally these turn up on eBay so I nabbed one tried my hand at modifying it. As it turns out they're well built, old-skool analogue and a breeze to work on - after tapping the discriminator / modulator the radio was bench tested using an 857D as a reference with a pair of NinoTNCs and works on 4k8 beautifully.

The PA puts out ~20W and can be adjusted using VR1. The deviation is adjusted with VR2 and is set ~5KHz from the factory. On Recieve it's (apparently) very selective & sensitive, and the second IF filter is 20KHz wide so this TRX might even work on wider bandwidth modes. Anecdotal testing using an IC-705 as a reference receiver the wideband PLL phase noise looks to be very low and there are no horrendous key-up transients a-la FTM-1500.

Schematic and tap points

radios/dr-m06th.1744498085.txt.gz · Last modified: 2025/04/12 22:48 by m0mzf