Differences

This shows you the differences between two versions of the page.

--- radios:ic-f210s [2024/06/06 11:25] – m0gzp
+++ radios:ic-f210s [2024/06/22 11:38] (current) – [Icom IC-F210S] m0gzp
@@ Line 1: / Line 1: @@
 ====== Icom IC-F210S ======
-*Preliminary details*
 {{:radios:ic-f110s_850x346.jpg?direct&400|}}
-An Icom PMR set that seems good for 1200bd Packet - 9600 testing to follow.
+An Icom PMR set that seems good for 1200bd/9600 Packet
 Short version:
-  * OPC-617 cable gives you a DB9 data port
+  * OPC-617 cable gives you a DB9 data port, home-brew is also possible
   * You need to enable external PTT on the cable through the programming software
   * You need to bridge solder pad F on the main board to enable data input through the cable
-  * I briefly flicked the Ninos to 9600 and I got the test sequences going, dummy load to antenna, but I need to spend more time on this.
+  * Martin G6FJI briefly flicked his Ninos to 9600 and got the test sequences going, dummy load to antenna
+  * Simon M0GZP tested IC-F210S with Yaesu FT8900 using two Ninos at 9600 and communication seemed to work well
+  * Further testing needed and encouraged
-Manuals and information:
+==== Manuals and information ====
 {{ :radios:ic-f110s_leaflet.pdf | Icom information leaflet }}
@@ Line 28: / Line 28: @@
 {{:radios:solder_pad_f_photo.jpg?direct&400| Solder Pad F picture}}
 If you don't have an OPC617 cable you can connect direct to the connector on the board as follows:
 {{:radios:opc617pinout.jpg?400|OPC617 pinout if you don't have the cable}}
+Here is an example of such a home-brew connection:
+{{:radios:opc617_1.jpeg?200|}}{{:radios:opc617_2.jpeg?200|}}
+The connector is an 11 pin JST ZH plug, but any size down to a 5 pin JST ZH can be used for connecting to NinoTNC (only pins 7,8,9 and 11 are needed)
+==== Shopping links ====
+[[https://www.radioworld.co.uk/icom_opc-617_accessory_cable| OPC-617 for sale at RadioWorld]]
+[[https://www.ebay.co.uk/itm/122716131223| Non-genuine programming cable ]] (worked for G6FJI)
+[[https://www.radiotronics.co.uk/icom-cs-f100s| Programming software for sale at Radiotronics]]