Differences

This shows you the differences between two versions of the page.

--- packet:cables [2025/12/18 11:44] – [Transceiver Connections] ei5iyb
+++ packet:cables [2025/12/20 21:05] (current) – m0lte
@@ Line 11: / Line 11: @@
 All you need to do then is work out (with a multimeter) which pin corresponds to each wire, and tack them to the pins on a 9 pin D shell plug as follows:
-^  Yaesu pin  ^ From radio to TNC Connection            ^  DB9 TNC pin    ^
+^  Yaesu pin  ^ TNC Connection            ^  DB9 TNC pin    ^
 |  1          | Audio to be transmitted   |  1 Transmit audio (TXA)    |
 |  2          | Ground                    |  6 Ground             |
@@ Line 22: / Line 22: @@
 {{:packet:yaesu-6-pin-mini-din-socket.png?200|}}
+Note: this is the BACK / SOLDER side of the PLUG:
+{{:kantronicstncwiring.png|}}
 Pick pin 4 if you'll be using 9600 baud, or pin 5 if you're using 1200 baud. You should be able to use pin 4 for 1200 baud as well.
@@ Line 107: / Line 112: @@
 {{:packet:g90_ninotnc_cable_wiring.png?400 |}}
+===== Icom 746 HF Packet =====
+This pinout works only for HF. Plugs are shows from the "back" meaning from the soldering side.
+VHF PTT is triggered by ACC(2) socket.
+This pinout is for ACC(1) socket.
+{{:packet:din_8_to_nino_tnc.png?400|}}
+===== Icom IC9700 =====
+{{:packet:ic9700_to_ninotnc.jpg|}}