Differences

This shows you the differences between two versions of the page.

--- packet:ninotnc [2026/07/11 10:47] – [Deviation / test-tone reference] m0lte
+++ packet:ninotnc [2026/08/07 20:58] (current) – Mort upgrade: tighten emphasis markers so they parse again 0.0.0.0
@@ Line 55: / Line 55: @@
 Baud is symbols per second, bps is bits per second. Where baud=bps, that means each symbol carries 1 bit (i.e. a symbol can have two states, 0 or 1). Where baud is 2x bps, that means each symbol carries 2 bits (i.e. a symbol can have four states: 00, 01, 10, 11).
-** Decoding Operating Modes from BrdSwchMod **
+**Decoding Operating Modes from BrdSwchMod**
 When the test button is pressed on the TNC, along with the frame it emits to the radio, it will emit a different frame to the KISS client that is connected.  The BrdSwchMod value in the test frame can be decoded to share information about the TNC:
@@ Line 137: / Line 137: @@
   * AX.25 - Basic over-the-air protocol utilised for packet radio
   * IL2P - Improved Layer 2 Protocol - effectively implements AX.25 but with some over-the-air improvements, transparent to the host software at both ends.
-  * IL2P+CRC - IL2P with added checksum. Co-developed by Nino KK4HEJ and Jonathan G4KLX to resolve corruption found with IL2P in practice.
+  * IL2P+CRC / IL2Pc - IL2P with added checksum. Co-developed by Nino KK4HEJ and Jonathan G4KLX to resolve corruption found with IL2P in practice.
   * BW - in this context, for FM: channel spacing, and for SSB: audio bandwidth.
   * Baud - symbols per second