User Tools

Site Tools


packet:ninotnc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
packet:ninotnc [2026/08/01 09:57] – [Definitions] m0ltepacket:ninotnc [2026/08/07 20:58] (current) – Mort upgrade: tighten emphasis markers so they parse again 0.0.0.0
Line 55: Line 55:
 Baud is symbols per second, bps is bits per second. Where baud=bps, that means each symbol carries 1 bit (i.e. a symbol can have two states, 0 or 1). Where baud is 2x bps, that means each symbol carries 2 bits (i.e. a symbol can have four states: 00, 01, 10, 11). Baud is symbols per second, bps is bits per second. Where baud=bps, that means each symbol carries 1 bit (i.e. a symbol can have two states, 0 or 1). Where baud is 2x bps, that means each symbol carries 2 bits (i.e. a symbol can have four states: 00, 01, 10, 11).
  
-** Decoding Operating Modes from BrdSwchMod **+**Decoding Operating Modes from BrdSwchMod**
  
 When the test button is pressed on the TNC, along with the frame it emits to the radio, it will emit a different frame to the KISS client that is connected.  The BrdSwchMod value in the test frame can be decoded to share information about the TNC: When the test button is pressed on the TNC, along with the frame it emits to the radio, it will emit a different frame to the KISS client that is connected.  The BrdSwchMod value in the test frame can be decoded to share information about the TNC:
packet/ninotnc.1785578224.txt.gz · Last modified: by m0lte