This is an old revision of the document!
HOWTO Use XRouter as a KISS Terminal
XRouter can be configured as a simple text-based KISS terminal, for testing KISS devices, examining protocols, and as a starter interface to Packet Radio that can be configured to do almost anything you need..
This quick and dirty HOWTO will first show you the bare minimum method of using XRouter to drive a KISS TNC (or any other KISS device that uses a real or pseudo-TTY).
It will then show how to drive KISS-over-TCP applications such as Direwolf.
Firstly, get a copy of XRouter (XrLin or XrPi).
Extract the executable (xrlin or xrpi) from the archive, and place it in a new folder of your choice. It doesn't matter what you call the folder, or where it is located. Xrouter will run entirely in this folder, and if you want to move or delete it, just move or delete the folder.
The only other thing XRouter needs is a configuration file, called XROUTER.CFG - yes it must be UPPER case!
A commented dummy configuration file is supplied with XRouter. You can adapt that, or you can simply create your own as follows:
