Differences

This shows you the differences between two versions of the page.

--- packet:bpq_nodes_on_aprs [2024/09/22 18:31] – [Receive-only setup] m0lte
+++ packet:bpq_nodes_on_aprs [2024/09/22 18:33] (current) – [Receive-only setup] m0lte
@@ Line 96: / Line 96: @@
 Do something like this to achieve a receive-only igate setup (e.g. if you are listening for telemetry beacons from remotely located kit, and you want to gate it to APRS-IS / aprs.fi)
-This will also put a BBS pin in the https://aprs.fi map for your own node, via the internet.
+This will also put a BBS pin in the https://aprs.fi map for your own node, via the internet. Like [[https://aprs.fi/#!z=14&call=a%2FGB7RDG&timerange=3600&tail=0|this]].
 Put this new block outside the PORTS section of the config file, i.e. at the root level.
@@ Line 102: / Line 102: @@
 <code>
 APRSDIGI
-  LAT=5126.83N    ; calculating these is non-obvious, use this website to help
+  LAT=5026.83N    ; calculating these is non-obvious, use this website to help
   LON=00101.62W   ; https://om1amj.sk/index.php/conversion-of-gps-coordinates-to-aprs-format
   StatusMsg=Put a message here, maybe a link to your node page at https://ukpacketradio.network
@@ Line 117: / Line 117: @@
 ***
 </code>
+Substitute appropriate values for yourself.
 Don't forget the *** at the end, it's crucial